UP! Software and ROM v1.17 Final

Support for UP Software. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: UP! Software and ROM v1.17 Final

Post by wackojacko » Sun Oct 21, 2012 10:19 pm

Howdy UPers!

If you have a version 1, you can now get 0.15mm resolution with the below ROM file
http://3dprintingsystems.com/UP!%20V5.041.ROM

Happy 3D printing and enjoy :D
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

User avatar
scubamatt41
Posts: 303
Joined: Thu Oct 11, 2012 7:47 am
Location: The Netherlands

Re: UP! Software and ROM v1.17 Final

Post by scubamatt41 » Mon Oct 22, 2012 6:07 am

wackojacko wrote:Howdy UPers!

If you have a version 1, you can now get 0.15mm resolution with the below ROM file
http://3dprintingsystems.com/UP!%20V5.041.ROM

Happy 3D printing and enjoy :D
Hi Bruce,

I'm a bit confused. On the same day as my UP mini being delivered I received an email from PP3DP which pointed me to:
A manual for the UP and UP plus ?
Software v1.17 ?

As I understand the v1.17 is now final ? What are the PROS and CONS between 1.16 and 1.17 ?

Please Bruce, can you clarify this?

Cheers, Matt
Always breath out on the way UP

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: UP! Software and ROM v1.17 Final

Post by wackojacko » Mon Oct 22, 2012 8:28 am

If you have an old UP Plus 3D Printer with v1 firmware, you can now update your ROM to get 0.15mm detail,
http://3dprintingsystems.com/UP!%20V5.041.ROM
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: UP! Software and ROM v1.17 Final

Post by wackojacko » Mon Oct 22, 2012 8:36 am

scubamatt41 wrote:
wackojacko wrote:Howdy UPers!

If you have a version 1, you can now get 0.15mm resolution with the below ROM file
http://3dprintingsystems.com/UP!%20V5.041.ROM

Happy 3D printing and enjoy :D
Hi Bruce,

I'm a bit confused. On the same day as my UP mini being delivered I received an email from PP3DP which pointed me to:
A manual for the UP and UP plus ?
Software v1.17 ?

As I understand the v1.17 is now final ? What are the PROS and CONS between 1.16 and 1.17 ?

Please Bruce, can you clarify this?

Cheers, Matt

Hi Matt,

Version 1.17 increases the resolution to (UP Plus 0.15mm) and (UP Mini 0.20mm) per layer, thats the biggest improvement. Version 1.17 is used on both printers.
There is a separate manual for each.
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: UP! Software and ROM v1.17 Final

Post by eyUP » Mon Oct 22, 2012 9:03 am

Howdy UPers!

If you have a version 1, you can now get 0.15mm resolution with the below ROM file
http://3dprintingsystems.com/UP!%20V5.041.ROM

Happy 3D printing and enjoy
Hi Bruce,
Have you managed to try this version ? I've sent to a customer and he is still getting the message "that this rom is not compatible with the printer"
We don't have any machines to test it on.
I think the customer is actually jena67 from this thread, so if anyone can help.....

pp3dp.nl
Posts: 252
Joined: Thu Jul 05, 2012 6:18 pm
Location: Holland/The Netherlands

Re: UP! Software and ROM v1.17 Final

Post by pp3dp.nl » Mon Oct 22, 2012 10:23 am

Well it's not the software version 1.17 that increases the resolution to 0.15 and 0.20, it's the ROM. I still use 1.15 and print 0.15 layers (after updating of course).

I would recommend to try different versions of the software if you experience any kind of problem. For instance I don't like that when I try to move a model (1.16 and 1.17) in the build area the info tab on the screen is blocking the moving and I have to click on it every time to make it disappear (1.15 doesn't have this problem). And Julia mentioned that in 1.17 she experiences stringing where before she didn't.

So I'm gonna stick with version 1.15 for the moment..

simplebot
Posts: 7
Joined: Wed Oct 13, 2010 9:15 pm

Re: UP! Software and ROM v1.17 Final

Post by simplebot » Mon Oct 22, 2012 6:50 pm

eyUP wrote:
Howdy UPers!

If you have a version 1, you can now get 0.15mm resolution with the below ROM file
http://3dprintingsystems.com/UP!%20V5.041.ROM

Happy 3D printing and enjoy
Hi Bruce,
Have you managed to try this version ? I've sent to a customer and he is still getting the message "that this rom is not compatible with the printer"
We don't have any machines to test it on.
I think the customer is actually jena67 from this thread, so if anyone can help.....
I'll try and put this rom on my printer tonight. I was also getting the error, as I have a firmware of v1. I'll post if I have success.

Jena67
Posts: 50
Joined: Sat Dec 10, 2011 9:28 am

Re: UP! Software and ROM v1.17 Final

Post by Jena67 » Wed Oct 24, 2012 5:18 pm

Hi,

I downloaded and tried the above ROM but got the same message that it was not compatible with my printer... :cry:

I hope somebody can help...

Thanks

Tiertime-Edward
Posts: 206
Joined: Tue Sep 07, 2010 9:15 am

Re: UP! Software and ROM v1.17 Final

Post by Tiertime-Edward » Thu Oct 25, 2012 3:12 am

Hi there,

If you are using a UP! basic, please use the ROM file <UP! Basic+ V5.07.ROM>. Please download it here, https://www.dropbox.com/s/0zv5a280zut3y ... 0V5.07.ROM

If the ROM files in your installation file don't work, please use the ROM file <UP! V5.041.ROM>. Please download it here, https://www.dropbox.com/s/pt69ok317zug2 ... V5.041.ROM

Thank you.

Tiertime-Edward
Posts: 206
Joined: Tue Sep 07, 2010 9:15 am

Re: UP! Software and ROM v1.17 Final

Post by Tiertime-Edward » Thu Oct 25, 2012 3:16 am

Jena67 wrote:Hi,

I downloaded and tried the above ROM but got the same message that it was not compatible with my printer... :cry:

I hope somebody can help...

Thanks
Hi Jena67,

When you update the ROM 5.041, is the error message still same like you update the ROM 6.041? Can you show me the dialogues that saying the new error massage?

Btw, is your UP printer, UP! basic or UP! plus?

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: UP! Software and ROM v1.17 Final

Post by eyUP » Thu Oct 25, 2012 8:07 am

Hi Jena67,

When you update the ROM 5.041, is the error message still same like you update the ROM 6.041? Can you show me the dialogues that saying the new error massage?

Btw, is your UP printer, UP! basic or UP! plus?
I think Jena67 is saying he gets the same message as his previous screenshots:
http://www.pp3dp.com/forum/viewtopic.ph ... t=20#p8367

Someone previously asked him to change language to english...I wonder if this is the cause of the ROM upgrade issues ? I know that currency / decimal seperator settings can mess up programs. eg, the software is expecting a . (dot) for decimal point but the system wants to use a , (comma)
It could be worth checking Regional and Language options from the control panel.

Jena67
Posts: 50
Joined: Sat Dec 10, 2011 9:28 am

Re: UP! Software and ROM v1.17 Final

Post by Jena67 » Fri Oct 26, 2012 5:08 pm

I will try changing the language in my control panel and let you know.

I'll cross my fingers while pressing "enter" to start the updating procedure! :)

Have a nice weekend.

Jena67
Posts: 50
Joined: Sat Dec 10, 2011 9:28 am

Re: UP! Software and ROM v1.17 Final

Post by Jena67 » Fri Oct 26, 2012 7:56 pm

Changed the system language from Italian to English but it did not work... :(

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: UP! Software and ROM v1.17 Final

Post by eyUP » Mon Oct 29, 2012 9:05 am

Changed the system language from Italian to English but it did not work...
How about the decimal seperator symbol ? That could still have remained as a comma which the software may not like and get confused when it is reading your printer's current ROM and firmware versions.

Jena67
Posts: 50
Joined: Sat Dec 10, 2011 9:28 am

Re: UP! Software and ROM v1.17 Final

Post by Jena67 » Mon Oct 29, 2012 4:36 pm

Well, I did not change it...

I'll try tonight and let you know.

Thanks for reminding me!

Antonio

Jena67
Posts: 50
Joined: Sat Dec 10, 2011 9:28 am

Re: UP! Software and ROM v1.17 Final

Post by Jena67 » Mon Oct 29, 2012 11:59 pm

I tried with "," and "." Add decimal separator but the result was the same, the ROM can't be used on printer... :(

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: UP! Software and ROM v1.17 Final

Post by wackojacko » Tue Oct 30, 2012 1:27 am

Pop me an email and I can try and help you dale at 3DPrintingSystems.com

www.3DPrintingSystems.com
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

t1t4
Posts: 8
Joined: Thu Oct 21, 2010 5:30 pm

Re: UP! Software and ROM v1.17 Final

Post by t1t4 » Mon Nov 05, 2012 5:01 am

I have a v1.00 UP!plus and I had the same "this rom is not compatible with the printer" that a few people here have been seeing.

After some trial and error I managed to get everything working.

I installed v1.14 and updated to rom 6.03

I also had to manually update the usb printer driver by going to the control panel -> view devises and printers -> double clicked the 3d printer -> hardware tab -> properties -> change settings -> driver tab -> update drivers -> browse my computer -> found the up dir called drivers and that did it.

Then I re-installed 1.17 and updated to rom 6.041 and everything seems to work fine now.

It seems like the rom had to be higher than what ever version I had originally had (what ever came factory installed). And the version 5.041 that was posted did install but wouldn't let me print or update to 6.041. Once I downgraded to 6.03 I was able to upgrade to 6.041.

Maybe that will work for others with a v1.00

Jena67
Posts: 50
Joined: Sat Dec 10, 2011 9:28 am

Re: UP! Software and ROM v1.17 Final

Post by Jena67 » Tue Nov 06, 2012 4:16 pm

t1t4, thanks!!!

I tried to install version 1.14 bu it didn't work so I removed the 3d printer from my printers list (W7).

Than I just plugged it in the USB port and the pc automatically loaded the driver, W7 did not ask me to choose between automatic or manual drivers choice.

Anyway I tried again to install the ROM version of the 1.17 package and it worked immediately!

Thanks again for the good tip.

Ciao

dakenskys
Posts: 34
Joined: Sun Aug 26, 2012 11:38 pm

Re: UP! Software and ROM v1.17 Final

Post by dakenskys » Sat Nov 17, 2012 5:38 pm

Hi Everybody,
Ok, so I'm a bit new to this game...I have an original machine and also can't install the new v1.17. I've read the suggestions about installing v1.14 and I downloaded it,
but unlike the v1.17 which was a zip file and contained a bunch of new files, the 1.14 is only an .exe file. When I double clicked on it, I saw a brief black screen,
and then nothing happened. Do I need to uninstall my v1.12 first? What about the additional files in my UPv12 folder like system, drivers etc? Do I delete
everything? I only have two zip files, V1.12 and v1.17. Any other version is an .exe file only.

I'm very confused and would appreciate any help. Thanks

Post Reply