Print head not touching bed when printing

Support for UP mini. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
tu
Posts: 1
Joined: Sun Jan 15, 2017 3:07 am

Print head not touching bed when printing

Post by tu » Sun Jan 15, 2017 3:14 am

Hi Guys,

I'm new here.

I am have a few problems with my up mini.
its used, not new.

so, what my current issue is that, when it starts to do a print, it prints 3mm away from the print bed.
I've calibrated the table top. but still seems to print away from the bed.
I don't what to do now.....

ricks01
Posts: 166
Joined: Wed Dec 30, 2015 6:07 pm

Re: Print head not touching bed when printing

Post by ricks01 » Mon Jan 16, 2017 6:35 am

Well, sounds to me that you just didn't set your nozzle height properly, do you use Up Studio or the older software?

Look at page 11 on how to set the nozzle height...
http://up3d-dev.github.io/downloads/doc ... %20Eng.pdf

Post Reply