UP Mini Platform Heater v2 Vs Mods

Support for UP mini. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
mrgibbon
Posts: 30
Joined: Mon Aug 31, 2015 12:28 am

UP Mini Platform Heater v2 Vs Mods

Post by mrgibbon » Thu Jan 28, 2016 7:45 am

Hi all, has anyone got or tried the UP Mini Platform Heater v2??
I've tried the thermal switch trick (100c) and the standard platform only ever gets to around 52 degrees.

Is there anything else I can try before I take the plunge and get the 80 degree platform?

Thanks

3DSTB
Posts: 33
Joined: Tue Jan 12, 2016 8:33 am

Re: UP Mini Platform Heater v2 Vs Mods

Post by 3DSTB » Thu Jan 28, 2016 4:55 pm

I have the red Heater Platform. Works well. Temp is 80 degree. You can select temps in 5 degree steps: 50 55 60 65 70 75 and 80. My platform heats to 80 degree in around 7 to 9 minutes. I can recommend the platform.

Stefan
Posts: 45
Joined: Tue Nov 03, 2015 5:29 am

Re: UP Mini Platform Heater v2 Vs Mods

Post by Stefan » Thu Feb 11, 2016 10:07 pm

I purchased the V2 board as well but still need to install it.

I rather put something in easily rather than modding the board which will void warranty.

3DSTB
Posts: 33
Joined: Tue Jan 12, 2016 8:33 am

Re: UP Mini Platform Heater v2 Vs Mods

Post by 3DSTB » Fri Feb 12, 2016 8:36 am

You can find some instructions here:

http://3dprintingsystems.com/wp-content ... ctions.pdf

Post Reply