head's leds are off during the printing

Support for UP mini. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
Carrare
Posts: 1
Joined: Tue May 28, 2013 1:51 pm

head's leds are off during the printing

Post by Carrare » Tue May 28, 2013 2:06 pm

Hi

I've got a Up Mini, it works pretty well but I would like to know why the head's leds are off during the printing of a model...
I found some pictures were the leds are on during the printing : http://www.pp3dp.com/images/stories/001.jpg
Does anyone knows about it and how can I switch the leds ON ?
Thank you

Star3DPrint
Posts: 6
Joined: Mon Dec 03, 2012 9:51 pm

Re: head's leds are off during the printing

Post by Star3DPrint » Tue May 28, 2013 3:52 pm

You need to double click (kind of slowly) the initialize button on the front of the Mini to turn the light on and off.

Thanks

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: head's leds are off during the printing

Post by roller » Fri May 31, 2013 6:08 am

You say slowly - I say double click quickly ... probably a matter of opinion but a bit of practice and you will get the hang of it. I don't recommend trying it when the printer is mid way through a print as I reinitialised the printer mid print by accident a couple of times.

Post Reply