Happy holidays + Model Giveaway

Talk about anything.
Tiertime-Elaine
Posts: 143
Joined: Wed Dec 20, 2017 4:23 am

Happy holidays + Model Giveaway

Post by Tiertime-Elaine » Fri Dec 22, 2017 9:47 am

Hi All,

We would like to wish you all a very Happy Holidays!!

Additional to this greeting, we are having a holiday giveaway for you!  A JEEP MODEL designed by Tiertime.

To win the model, make sure you LIKE our Facebook Page(https://www.facebook.com/Tiertime/) + REPLY this topic with a picture of your favorite print of 2017.

Voila, that's it. We will send you the model through email.


With best wishes,
Tiertime Team
Last edited by Tiertime-Elaine on Tue Dec 26, 2017 5:23 am, edited 2 times in total.

User avatar
3DWP
Posts: 194
Joined: Wed Dec 30, 2015 4:00 pm
Location: Netherlands
Contact:

Re: Happy holidays + Model Giveaway

Post by 3DWP » Fri Dec 22, 2017 4:24 pm

Last year I made this as a gift, it was made with wood filament:

[attachment=0]BabyGroot.jpg[/attachment]
Attachments
BabyGroot.jpg
BabyGroot.jpg (110.21 KiB) Viewed 10510 times

bccthomson
Posts: 1
Joined: Sat Dec 23, 2017 11:16 am

Re: Happy holidays + Model Giveaway

Post by bccthomson » Sat Dec 23, 2017 11:22 am

Printacar challenge winning car !! Beat a whole bunch of schools in the competition. Studetns did an amazing job
And we won a new tiertime pribter out of it !!!
Great fun
Attachments
76BE0C8A-3BF9-4184-A0D6-9C5871C136AA.jpeg
76BE0C8A-3BF9-4184-A0D6-9C5871C136AA.jpeg (372.36 KiB) Viewed 10457 times

Tosun
Posts: 2
Joined: Tue Jan 05, 2016 8:55 am

Re: Happy holidays + Model Giveaway

Post by Tosun » Sat Dec 23, 2017 1:19 pm

Hi,

You said one , I've added three. OK ?
Wish you all have a nice new year.
Attachments
IMG_20161031_180306.jpg
IMG_20161031_180306.jpg (729.62 KiB) Viewed 10457 times
IMG_20160928_221722.jpg
IMG_20160928_221722.jpg (982 KiB) Viewed 10457 times
IMG_20150904_181851.jpg
IMG_20150904_181851.jpg (2.12 MiB) Viewed 10457 times

3D Krsk
Posts: 2
Joined: Sat Oct 21, 2017 6:24 pm

Re: Happy holidays + Model Giveaway

Post by 3D Krsk » Sat Dec 23, 2017 2:31 pm

Cover for car mirror
[attachment=0]_DSC2582.JPG[/attachment]
[attachment=1]_DSC2581.JPG[/attachment]
[attachment=2]_DSC2580.JPG[/attachment]
[attachment=3]_DSC2578.JPG[/attachment]
Attachments
_DSC2582.JPG
_DSC2582.JPG (297.99 KiB) Viewed 10404 times
_DSC2581.JPG
_DSC2581.JPG (287.99 KiB) Viewed 10404 times
_DSC2580.JPG
_DSC2580.JPG (264.84 KiB) Viewed 10404 times
_DSC2578.JPG
_DSC2578.JPG (340.78 KiB) Viewed 10404 times

3D Krsk
Posts: 2
Joined: Sat Oct 21, 2017 6:24 pm

Re: Happy holidays + Model Giveaway

Post by 3D Krsk » Sat Dec 23, 2017 2:32 pm

Cover for car mirror
[attachment=0]_DSC2581.JPG[/attachment]
Attachments
_DSC2581.JPG
_DSC2581.JPG (287.99 KiB) Viewed 10404 times

ALLAXIS3D
Posts: 1
Joined: Sat Dec 23, 2017 5:10 pm

Re: Happy holidays + Model Giveaway

Post by ALLAXIS3D » Sat Dec 23, 2017 5:15 pm

This architectural scale model was printed with two UP Box + printers and measured 2’x6’ in size
Attachments
AD874E7C-2905-4E17-9F09-F941D0A8CD3E.jpeg
This architectural scale model was printed with two UP Box + printers and measured 2’x6’ in size
AD874E7C-2905-4E17-9F09-F941D0A8CD3E.jpeg (97.13 KiB) Viewed 10404 times

hasmac
Posts: 1
Joined: Mon Jan 09, 2017 9:36 am

Re: Happy holidays + Model Giveaway

Post by hasmac » Sat Dec 23, 2017 8:23 pm

Messed everyone's head recently with this picture, https://www.tinkercad.com/things/d7coTuVER9e
Attachments
19105956_10212070182257576_4228822109698644805_n.jpg
19105956_10212070182257576_4228822109698644805_n.jpg (352.24 KiB) Viewed 10404 times

johnpaulgrosser
Posts: 1
Joined: Sun Dec 24, 2017 9:03 am

Re: Happy holidays + Model Giveaway

Post by johnpaulgrosser » Sun Dec 24, 2017 9:12 am

Almost finished building this Hotrod but the Up mini 2 bed is smaller than the model so cutting the prints has been fun, really! :)
Considering the printer I had before this Up Mini 2 is the greatest and prints like a boss.
Attachments
IMG_0519.JPG
IMG_0519.JPG (1.46 MiB) Viewed 10385 times

Tiertime-Elaine
Posts: 143
Joined: Wed Dec 20, 2017 4:23 am

Re: Happy holidays + Model Giveaway

Post by Tiertime-Elaine » Mon Dec 25, 2017 3:12 am

UP_3DWP wrote:
> Last year I made this as a gift, it was made with wood filament:
>
> [attachment=0]BabyGroot.jpg[/attachment]


How long it take you to post-processing this model?

BTW, please DM me your email address :)

Elaine

Tiertime-Elaine
Posts: 143
Joined: Wed Dec 20, 2017 4:23 am

Re: Happy holidays + Model Giveaway

Post by Tiertime-Elaine » Mon Dec 25, 2017 3:38 am

bccthomson wrote:
> Printacar challenge winning car !! Beat a whole bunch of schools in the
> competition. Studetns did an amazing job
> And we won a new tiertime pribter out of it !!!
> Great fun


Nice part, but what's is it this?

Elaine

Scruffy
Posts: 1
Joined: Mon Dec 25, 2017 12:25 pm

Re: Happy holidays + Model Giveaway

Post by Scruffy » Mon Dec 25, 2017 12:28 pm

My favorite print this year is a snowboarder that was painted up.
Attachments
received_1798366683538265.jpeg
received_1798366683538265.jpeg (152.3 KiB) Viewed 10361 times
received_1798366646871602.jpeg
received_1798366646871602.jpeg (157.77 KiB) Viewed 10361 times
20171116_075227.jpg
20171116_075227.jpg (2.05 MiB) Viewed 10361 times

User avatar
3DWP
Posts: 194
Joined: Wed Dec 30, 2015 4:00 pm
Location: Netherlands
Contact:

Re: Happy holidays + Model Giveaway

Post by 3DWP » Mon Dec 25, 2017 12:35 pm

Hi Elaine, I just mailed you.

I could have taken more time on the eyes, I have seen some great ones online (this is a popular model).

I first used a bit of sanding paper, then I sprayed the model with matte clear varnish and then I applied the moss. That didn't take long, just use a brush to apply some wood glue and then sprinkle the moss on it.

zeneram
Posts: 1
Joined: Wed Apr 19, 2017 11:35 am

Re: Happy holidays + Model Giveaway

Post by zeneram » Mon Dec 25, 2017 12:55 pm

I've been using UP 3D Printers for 3 years and been making objects from humanitarian supplies for disaster relief to spare parts for engineering projects. The houses in the picture represents educational models for earthquake resistant houses in Nepal. Thanks!
Attachments
wheel mould_1.jpg
wheel mould_1.jpg (370.78 KiB) Viewed 10361 times
houseall.jpg
houseall.jpg (344.11 KiB) Viewed 10361 times

tel
Posts: 242
Joined: Tue Feb 09, 2016 1:35 pm
Location: Australia
Contact:

Re: Happy holidays + Model Giveaway

Post by tel » Tue Dec 26, 2017 9:35 am

This is the first file I designed in Fusion 360. When I got the upgrade kit the dual fan didnt work on my upbox as the back magnet interferes with the fan stopping it rotating. As a result I need to design a mod. Not knowing how to do this I gave myself some quick lessons in Fusion 360 and then designed the mod. Which is why its my favourite - its the first thing I designed and printed.
IMG_0421.JPG
IMG_0421.JPG (89.88 KiB) Viewed 10327 times
IMG_0422.JPG
IMG_0422.JPG (83.81 KiB) Viewed 10327 times
Terry

brunningm
Posts: 210
Joined: Fri Jul 21, 2017 9:44 am

Re: Happy holidays + Model Giveaway

Post by brunningm » Fri Dec 29, 2017 10:03 pm

tegregg wrote:
Tue Dec 26, 2017 9:35 am
This is the first file I designed in Fusion 360. When I got the upgrade kit the dual fan didnt work on my upbox as the back magnet interferes with the fan stopping it rotating. As a result I need to design a mod. Not knowing how to do this I gave myself some quick lessons in Fusion 360 and then designed the mod. Which is why its my favourite - its the first thing I designed and printed.

Terry
That looks pretty good. Have you got the STL's for that? Pretty Please? :D

tel
Posts: 242
Joined: Tue Feb 09, 2016 1:35 pm
Location: Australia
Contact:

Re: Happy holidays + Model Giveaway

Post by tel » Mon Jan 01, 2018 1:13 am

brunningm wrote:
Fri Dec 29, 2017 10:03 pm
tegregg wrote:
Tue Dec 26, 2017 9:35 am
This is the first file I designed in Fusion 360. When I got the upgrade kit the dual fan didnt work on my upbox as the back magnet interferes with the fan stopping it rotating. As a result I need to design a mod. Not knowing how to do this I gave myself some quick lessons in Fusion 360 and then designed the mod. Which is why its my favourite - its the first thing I designed and printed.

Terry
That looks pretty good. Have you got the STL's for that? Pretty Please? :D
Ive tweeked it a little to get more airflow but happy to send if you pm me your email.

Tiertime-Elaine
Posts: 143
Joined: Wed Dec 20, 2017 4:23 am

Re: Happy holidays + Model Giveaway

Post by Tiertime-Elaine » Tue Jan 02, 2018 11:40 pm

zeneram wrote:
Mon Dec 25, 2017 12:55 pm
I've been using UP 3D Printers for 3 years and been making objects from humanitarian supplies for disaster relief to spare parts for engineering projects. The houses in the picture represents educational models for earthquake resistant houses in Nepal. Thanks!

Wow, that's truly impressive and meaningful, actually.

Please DM me your email address then I can send you the jeep model file!!

Elaine

Tiertime-Elaine
Posts: 143
Joined: Wed Dec 20, 2017 4:23 am

Re: Happy holidays + Model Giveaway

Post by Tiertime-Elaine » Tue Jan 02, 2018 11:41 pm

Scruffy wrote:
Mon Dec 25, 2017 12:28 pm
My favorite print this year is a snowboarder that was painted up.

Are you a snowboarder? I do wish I could master the snowboarder in 2018.

Please DM me your email address and I could send you the jeep file.

Elaine

User avatar
3DWP
Posts: 194
Joined: Wed Dec 30, 2015 4:00 pm
Location: Netherlands
Contact:

Re: Happy holidays + Model Giveaway

Post by 3DWP » Sat Jan 06, 2018 1:57 pm

Does everybody that posted here get the Jeep model?

Post Reply