UP 2.17 Software

Talk about anything.
Post Reply
User avatar
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am

UP 2.17 Software

Post by wackojacko » Fri Aug 21, 2015 11:40 am

This is the latest version of the UP 2.17 software for Windows only

1. Thin wall printing support. :D
2. Build table leveling can work between -1mm and 1mm.
3. Added ABS+ option for new material under maintenance. If you have the newer glossy/sheen UP ABS+ 500g rolls, then this setting makes it easier to remove rafts and support.
4. UP BOX- Bug fixes for printing at 0.1mm :P Finally 100 micron printing and the ability to remove rafts!
5. UP BOX- New printhead cover for UP BOX. You can find the UP3 files in UP Example – UP BOX Spare Parts. Printhead Cover-V4.UP3 and Printhead Extruder Bracket-V3.UP3 - If you have an UP BOX you should defniatly replace your head cover with this new and improved version.

Download from http://3dprintingsystems.com/support/

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

Posts: 252
Joined: Thu Jul 05, 2012 6:18 pm
Location: Holland/The Netherlands

Re: UP 2.17 Software

Post by pp3dp.nl » Fri Aug 21, 2015 1:39 pm

Yes!! Nice.. I just saw it and came here to read your post. Thanks for the info, you're always on point.

So it is good? I just printed something 0.1 mm last week and it was acceptable, raft came off well. Thin walls, is that working well?

So many questions, I'll test the software ASAP.

Thanks to everyone involved!

Maarten Visser
Posts: 27
Joined: Thu Nov 20, 2014 11:02 am

Re: UP 2.17 Software

Post by Maarten Visser » Mon Sep 14, 2015 2:17 pm

I'm having an issue with 2.17: ever since I use it I get a message "please show the error msg 20150630". No idea what it means. After that I must initialise again before the next print. Anybody knows what this means?
greetings from Amsterdam, Maarten

Posts: 48
Joined: Sun Jun 09, 2013 6:51 am
Location: Adelaide Australia

Re: UP 2.17 Software

Post by mrt » Sun Oct 04, 2015 4:31 am

Hi Maarten

I had that issue with V 2.17 on both our demo UP Plus 2 and UP Box. This suggested it was most likely a software issue. We went back to V2.15 and have not seen the error since.
It occurred mostly with larger prints.
3D Printing Solutions

Post Reply