round object problem... or curvel on my up+2

Talk about anything.
Post Reply
fei8820
Posts: 14
Joined: Tue Jul 14, 2015 10:12 am

round object problem... or curvel on my up+2

Post by fei8820 » Sun Aug 16, 2015 9:10 am

i got a upplus2 this few month ago.. but i just notice that it wont print round object perfectly ... or curve ... is that something happen with my calibrations ? or software ? anyone encounter this before ?

any reply in this would be highly appriciated :)
Attachments
11836896_10153804534604578_4386335344737538846_n.jpg
11836896_10153804534604578_4386335344737538846_n.jpg (65.41 KiB) Viewed 4843 times

User avatar
Tiertime-Jason
Posts: 286
Joined: Mon May 05, 2014 4:31 am

Re: round object problem... or curvel on my up+2

Post by Tiertime-Jason » Mon Aug 17, 2015 6:54 am

You could check if the movement of the print head or platform were blocked.

fei8820
Posts: 14
Joined: Tue Jul 14, 2015 10:12 am

Re: round object problem... or curvel on my up+2

Post by fei8820 » Mon Aug 17, 2015 11:29 am

nop.... when i turn off and i move the extruder gentley it really smooth... no weird clicking or whatsever sound detected

mb20music
Posts: 375
Joined: Thu Feb 14, 2013 1:35 am
Location: USA

Re: round object problem... or curvel on my up+2

Post by mb20music » Mon Aug 17, 2015 4:54 pm

How about the platform? does it appear to be moving smoothly when you move it by hand?

Might be the x belt block, could be loose and/or broken.

fei8820
Posts: 14
Joined: Tue Jul 14, 2015 10:12 am

Re: round object problem... or curvel on my up+2

Post by fei8820 » Tue Aug 18, 2015 2:00 am

the x very steady... no crack... no blocking but there is sound when moving fast... but i think that is normal ?

Post Reply