Heating printing platform

Talk about anything.
Post Reply
eimaxda
Posts: 5
Joined: Sat Dec 06, 2014 7:20 pm

Heating printing platform

Post by eimaxda » Mon Dec 08, 2014 6:07 pm

Hi all! I have a Problem with wrapping at big objects. In the user manual stand that the printing platform can be preheated to 100°C to improve the printing results. My Problem is that i can not find a possibility in the Software to change the temperature. In the Software the temperature is default at ca. 60°C. Does anyone have an idea how I can change the temperature? Many thanks eimaxda.

brainzilla
Posts: 141
Joined: Sat Nov 29, 2014 5:41 pm

Re: Heating printing platform

Post by brainzilla » Tue Dec 09, 2014 12:58 am

What printer do you have?
The Up! Mini does not have a control for the heatbed.

mb20music
Posts: 375
Joined: Thu Feb 14, 2013 1:35 am
Location: USA

Re: Heating printing platform

Post by mb20music » Tue Dec 09, 2014 1:30 am

If you have the UP! Mini printer, the platform heater does not reach 100 degrees celcius like the UP! Plus does. However many people have modded their UP! Mini to allow the platform to reach higher temperatures close to or the same as the UP! Plus. You can do a search on how to perform this mod.

Post Reply