Auto level on Up Plus2 not highlighted

Talk about anything.
Post Reply
foyletech
Posts: 1
Joined: Thu Sep 25, 2014 2:40 pm

Auto level on Up Plus2 not highlighted

Post by foyletech » Fri Sep 26, 2014 11:52 am

Hi

Wondering if anyone has ever come accross my problem with auto leveling; When i turn on printer my next step when going to print an item is to 'inisialise' afterwhich I the auto level function should be highlightable - ITS NOT ITS JUST GREYED OUT!.

I've tried everything i can think of and check the cable to no avail - i also understand it would be greyed out if nozzle was heated up but this is not the problem.

Any ideas would be greatful?

Chris botha
Posts: 102
Joined: Sat May 03, 2014 7:30 am

Re: Auto level on Up Plus2 not highlighted

Post by Chris botha » Wed Oct 08, 2014 2:11 am

does it to me every other time I fire it up.

turn off printer, unplug it. unplug usb. close UP software.

Then in this sequence.

Turn on printer, hit the homing sequence switch. plug in the usb. Open Up software, and you back in business.

Sad that a 2199 device.. no wait a 1899.. wait.. 1399.. wait $1099 device should do this ;)

lukeott
Posts: 53
Joined: Wed Jun 26, 2013 6:43 am

Re: Auto level on Up Plus2 not highlighted

Post by lukeott » Thu Oct 09, 2014 3:35 pm

Yes, I've noticed this too, most annoying.
I have discovered that the only time it seems to be greyed out is on the rare occasions I want to use that feature :x

Post Reply