Problems with stl model

Talk about anything.
Post Reply
samriel
Posts: 2
Joined: Mon May 05, 2014 4:58 pm

Problems with stl model

Post by samriel » Tue May 06, 2014 4:29 am

Hi, uppers!
Im new there and my english is not ok (im in the russians 8th form)
But can you tell me why my up mini doesent want to print that model and how to fix that?
Best regards, Andrew)

Screen shot
http://hostingkartinok.com/show-image.p ... 253d665748

Real print(
http://hostingkartinok.com/show-image.p ... fb78017d3c

D3rax
Posts: 139
Joined: Thu Feb 07, 2013 7:54 pm
Location: Netherlands

Re: Problems with stl model

Post by D3rax » Wed May 07, 2014 6:45 am

Your model is not solid, thats why the upper part turns red and does not print. You can run your .stl file through netfabb and repair it https://netfabb.azurewebsites.net/.
Up! Plus

samriel
Posts: 2
Joined: Mon May 05, 2014 4:58 pm

Re: Problems with stl model

Post by samriel » Wed May 07, 2014 10:30 am

D3rax wrote:Your model is not solid, thats why the upper part turns red and does not print. You can run your .stl file through netfabb and repair it https://netfabb.azurewebsites.net/.
Thanks for your advice!) netfabb is an expensive program, so ive found free alternative
here it is
https://netfabb.azurewebsites.net/

teamcarlisle
Posts: 180
Joined: Wed Jul 25, 2012 5:00 am

Re: Problems with stl model

Post by teamcarlisle » Fri May 09, 2014 12:17 am

You realize that's the same exact website...

D3rax
Posts: 139
Joined: Thu Feb 07, 2013 7:54 pm
Location: Netherlands

Re: Problems with stl model

Post by D3rax » Fri May 09, 2014 7:15 am

:lol: :roll:

By the way if you like a free offline version of netfabb basic, you can get it here http://www.netfabb.com/basic.php
Up! Plus

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: Problems with stl model

Post by roller » Fri May 09, 2014 4:53 pm

Yeah Samriel, that's the cloud version of Netfabb that I think D3rax intended you to use. Microsoft has now taken it up and branded it.

D3rax, the free version of the Netfabb app (not cloud version) is pretty painful these days - the repair function is certainly next to useless. I'd say the repair function within the Up app does as good a job. If you have an older (2+ years old) free version before they mamed many of the free features you'll have a better experience.

Post Reply