3D Printing Survey

Talk about anything.
Post Reply
amarler
Posts: 11
Joined: Fri Mar 29, 2013 11:42 am

3D Printing Survey

Post by amarler » Fri Oct 18, 2013 1:35 pm

Hi Guys

As part of my final year at university I am undertaking a project to develop a machine which recycles old raft material and failed prints back into usable filament. I know there are a number of them about already but I have some ideas of how to improve on the current crop of designs and offer the customer (potential you guys) a better product.

So if you have a few minutes to spare and use a 3D printer I would be most grateful to receive your answer to my short survey.

http://freeonlinesurveys.com/app/render ... book%2Ecom

Many thanks
Alex - UK

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: 3D Printing Survey

Post by roller » Fri Oct 18, 2013 1:47 pm

Before you get too many responders I thought I should point out you seem to have the logic of your answers back to front. Answers where you would expect a single answer (eg yes/no questions or how many hours a month do you use or how much do you expect to pay) allow multiple answers yet ones where you would definitely see multiple answers (eg what materials do you use) allows only a single and not multiple choices. It seems the logic for all your questions is the opposite to what would be necessaring for ascertaining and collating complete results.

You might want to revise it before you get too many broken results.

amarler
Posts: 11
Joined: Fri Mar 29, 2013 11:42 am

Re: 3D Printing Survey

Post by amarler » Fri Oct 18, 2013 4:19 pm

Hi

Thank you taking the time to give me this feedback, I've just re-jigged the survey so it should work properly now

Apologies for that mistake

Please use the below link to complete my survey

Thanks to all who help :)

http://freeonlinesurveys.com/s.asp?sid= ... zhpm353613

Brandom
Posts: 6
Joined: Thu Oct 24, 2013 9:18 am

Re: 3D Printing Survey

Post by Brandom » Thu Oct 24, 2013 9:43 am

Fill it! Good luck with your project!

Post Reply