Filament melting point list?

Talk about anything.
Post Reply
pilotltd
Posts: 19
Joined: Wed Jul 31, 2013 6:40 am

Filament melting point list?

Post by pilotltd » Wed Sep 25, 2013 10:33 am

Hi Folks - I saw a chart somewhere with lists of melting points for different colour/manufacturer's filament. I can't find it now :(

Anyone got a link to it?

Thanks

Steve

User avatar
JuliaDee
Posts: 959
Joined: Sun May 06, 2012 10:00 pm
Location: Connecticut
Contact:

Re: Filament melting point list?

Post by JuliaDee » Wed Sep 25, 2013 12:54 pm

It was posted by Drew Petitclerc but searching for it in the forum is difficult. Here's the spreadsheet.
Spool supply inventory cut down.xlsx.zip
(16.24 KiB) Downloaded 305 times

User avatar
DrewPetitclerc
Posts: 581
Joined: Sat Feb 12, 2011 7:39 am
Location: Silicon Valley California
Contact:

Re: Filament melting point list?

Post by DrewPetitclerc » Wed Sep 25, 2013 4:10 pm

Remember though that the list is relative to my machines setup, temp mod, room temp and the displayed temp numbers are not exact, I have not taken the time to measure the display versus actual extruder temp.
Drew Petitclerc
Petitclerc Designs
Owner/Senior Principal Designer, prototype, tooling and test equipment design and 3D printing
http://flash-graphics.deviantart.com/
http://www.thingiverse.com/DrewPetitclerc

pilotltd
Posts: 19
Joined: Wed Jul 31, 2013 6:40 am

Re: Filament melting point list?

Post by pilotltd » Wed Sep 25, 2013 11:30 pm

JuliaDee wrote:It was posted by Drew Petitclerc but searching for it in the forum is difficult. Here's the spreadsheet.
Spool supply inventory cut down.xlsx.zip
Thanks Julia, your not kidding searching is difficult :)

pilotltd
Posts: 19
Joined: Wed Jul 31, 2013 6:40 am

Re: Filament melting point list?

Post by pilotltd » Wed Sep 25, 2013 11:33 pm

DrewPetitclerc wrote:Remember though that the list is relative to my machines setup, temp mod, room temp and the displayed temp numbers are not exact, I have not taken the time to measure the display versus actual extruder temp.
Noted - it will give me a guide to start from with hotter/cooler.

Thanks Drew for your work.

Steve

Post Reply