Balance Optimizer

Talk about anything.
Post Reply
User avatar
JuliaDee
Posts: 959
Joined: Sun May 06, 2012 10:00 pm
Location: Connecticut
Contact:

Balance Optimizer

Post by JuliaDee » Thu Aug 01, 2013 1:34 pm

Very cool:

http://3dprintingindustry.com/2013/08/0 ... -tip-over/

Edward, when can we have this in the Up! software ? :)

chippwalters
Posts: 51
Joined: Mon Sep 02, 2013 2:37 am
Contact:

Re: Balance Optimizer

Post by chippwalters » Wed Sep 04, 2013 2:03 am

cool beans. Thanks for sharing :D

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: Balance Optimizer

Post by roller » Wed Sep 04, 2013 5:08 am

Actually, you wouldn't need to support this in the slicer so long as you can provide the optimizer the number of shells and the infill density.

outsider
Posts: 49
Joined: Tue Mar 12, 2013 2:08 pm

Re: Balance Optimizer

Post by outsider » Thu Sep 05, 2013 3:39 pm

So do we know the exact (numeric) infill density for the 4 settings we have on the Up! Plus?
adrian.
My Blog

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: Balance Optimizer

Post by roller » Fri Sep 06, 2013 9:18 am

No ... but it's calculable by printing a set of identical cubes with varying infill and the shell setting then weighing them.

Post Reply