V2.0 Software for Afinia

Talk about anything.
Post Reply
hawkeye
Posts: 3
Joined: Wed Jul 31, 2013 5:40 pm

V2.0 Software for Afinia

Post by hawkeye » Wed Jul 31, 2013 5:46 pm

Would the UP! V2.0 software work for the Afinia H479? Firmware differences, could I brick my machine? Currently I am at V1.19, might not be too many improvments over that.

Plus I was wondering if Afinia or UP! would consider offering an automatic bed leveling upgrade kit, I would buy that!

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: V2.0 Software for Afinia

Post by roller » Thu Aug 01, 2013 7:31 am

Yes 2.0 will work especially if you're already using 1.19.

The leveling kit plugs into an extra connection to the mainboard which is found on the Up Plus 2 printers.

LonV
Posts: 220
Joined: Thu Nov 15, 2012 11:53 pm
Location: Phoenix, Arizona, USA

Re: V2.0 Software for Afinia

Post by LonV » Thu Aug 01, 2013 7:51 pm

I'm using v2.0 on my Afinia...no issues.

hawkeye
Posts: 3
Joined: Wed Jul 31, 2013 5:40 pm

Re: V2.0 Software for Afinia

Post by hawkeye » Fri Aug 02, 2013 1:07 am

Thanks! Much appreciated! Downloading it now...

"The leveling kit plugs into an extra connection to the mainboard which is found on the Up Plus 2 printers."

Does this extra connection exist on the earlier circuit card assembly or is it on another revision? I read that the guys at Octave tried it and did not work, I'd like to know what they did exactly to try it. Maybe there's another way :geek:

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: V2.0 Software for Afinia

Post by wackojacko » Fri Aug 02, 2013 8:11 am

I believe it will only work on the new motherboards and an UP Plus 2 CPU, so there is no chance to get this on old UP Plus
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: V2.0 Software for Afinia

Post by roller » Fri Aug 02, 2013 8:14 am

wackojacko wrote:I believe it will only work on the new motherboards and an UP Plus 2 CPU, so there is no chance to get this on old UP Plus
For those skimming through this comment relates to the leveling kit only ... not to the V2.0 software.

hawkeye
Posts: 3
Joined: Wed Jul 31, 2013 5:40 pm

Re: V2.0 Software for Afinia

Post by hawkeye » Fri Aug 02, 2013 11:47 am

Can a mod change the title of the topic for us? Something like "V2.0 Software for Afinia + Leveling kit?"

Post Reply