Search found 139 matches

by D3rax
Sat Mar 02, 2013 6:54 pm
Forum: UP Plus
Topic: Nothing seems to be working
Replies: 13
Views: 10406

Re: Nothing seems to be working

I meant page 47 of this manual: http://www.pp3dp.com/index.php?option=c ... 36&catid=3

It explains reinstalling the drivers.
by D3rax
Sat Mar 02, 2013 6:24 pm
Forum: General Discussion
Topic: octave nylon filament
Replies: 29
Views: 26061

Re: octave nylon filament

I had good results with the Taulman 618 nylon on my Up! Plus. I did not use a temp mod so I used the standerd ABS temperature. I used the standaard prefboard and opened the windbarriere. Only problem is removing the support material. This was in some places almost imposible.... Do you guys have some...
by D3rax
Sat Mar 02, 2013 6:17 pm
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

Hey Gilbert, Welkom bij de club :D, ik heb mijn Up! Plus ook bij printabout besteld. Ik ben er zeer tevreden over. Wel kan ik je inderdaad aanraden om een afzuigingskap te maken. Maar ik denk dat je die conclusie al vrij snel zelf zult trekken na je eerste prints.... Ik heb inmiddels bij Formfutura ...
by D3rax
Fri Mar 01, 2013 6:14 pm
Forum: General Discussion
Topic: octave nylon filament
Replies: 29
Views: 26061

Re: octave nylon filament

I made a holder for the new taulman spool. Works with the octave spool adapter.

http://www.thingiverse.com/thing:55942
by D3rax
Fri Mar 01, 2013 6:11 pm
Forum: UP Plus
Topic: Nothing seems to be working
Replies: 13
Views: 10406

Re: Nothing seems to be working

Try the steps on page 47 of the up plus manual, maybe it helps for your problem to?
by D3rax
Fri Mar 01, 2013 5:53 pm
Forum: General Discussion
Topic: Support Material Challenges
Replies: 6
Views: 5791

Re: Support Material Challenges

I would like to test a few prints with minimal support material. Does anyone know the best settings for minimal support?
by D3rax
Sat Feb 23, 2013 7:47 pm
Forum: UP Plus
Topic: Up! plus fume cabinet
Replies: 11
Views: 8647

Re: Up! plus fume cabinet

Yes I made some cutouts on the side and the back ;)
by D3rax
Sat Feb 23, 2013 9:44 am
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

De bovenkant is niet mat maar doorzichtig, dus van bovenaf kun je best goed de print in de gaten houden. Helaas heb ik geen doorzichtige bakken van dit formaat gezien.
by D3rax
Fri Feb 22, 2013 8:55 pm
Forum: UP Plus
Topic: Up! plus fume cabinet
Replies: 11
Views: 8647

Up! plus fume cabinet

I made a simple but effective fume cabinet for the Up! plus to remove those nasty ABS fumes. It was really easy to make and total cost are about 50 euro's :D http://www.thingiverse.com/thing:53077 http://thingiverse-production.s3.amazonaws.com/renders/b5/ac/4f/c8/ff/_DSC0851_preview_featured.jpg htt...
by D3rax
Fri Feb 22, 2013 8:53 pm
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

Ik heb inmiddels ook mijn afzuiging gemaakt. Het is geen plexiglas ombouw geworden, dat was echt veel te duur. Het Ikea kastje is het uiteindelijk ook niet geworden, ik heb eerst nog eens nagedacht over een wat goedkoper alternatief. En uiteindelijk dus ook gevonden! Was erg makkelijk om te maken, t...
by D3rax
Fri Feb 15, 2013 6:46 pm
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

Dat onbehaagelijke gevoel kan ik zeer zeker beamen en ook ik krijg al vrij snel koppijn. Al met al lijkt het mij niet gezond. Ik heb dan ook al plannen om een goede afzuiging te maken. Ik was eigenlijk van plan om van plexiglas een ombouw te maken die over de printer kan worden geplaatst (mbv deze c...
by D3rax
Fri Feb 15, 2013 3:41 pm
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

Nice dan ga ik binnenkort ook eens nylon proberen. Klopt het ook dat nylon minder stinkt dan ABS? Ik kan persoonlijk de ABS dampen niet goed verdragen, ik wil dan ook binnenkort overstappen naar PLA en/of nylon. Nog een vraagje ten aanzien van PLA. Ik lees op het forum dat veel mensen voor PLA v1.15...
by D3rax
Fri Feb 15, 2013 3:24 pm
Forum: UP Plus
Topic: Power output for extra fan
Replies: 8
Views: 6778

Power output for extra fan

Hello, I noticed that the Up! Plus has an power output on the back, next to the powerconnector. I believe this is for powering the motor of the old fillament loader. Does anyone knows what volt the output is and if it's save to connect and power an extra fan? Has someone done this already or is ther...
by D3rax
Fri Feb 15, 2013 10:16 am
Forum: UP Software
Topic: [FEATURE REQUEST] preview of calculated support
Replies: 16
Views: 16161

Re: [FEATURE REQUEST] preview of calculated support

According to the manual, the calculationpreview of the printtime and the weight of the model, that shows up before you start the print, displays the weight of the model including the added support. I've not checked this, but if this is true it looks to me that the calculation of the supportmaterial ...
by D3rax
Thu Feb 14, 2013 6:28 pm
Forum: UP Plus
Topic: Changes to newer machines? Hot steppers and PLA printing
Replies: 8
Views: 7282

Re: Changes to newer machines? Hot steppers and PLA printing

I received a new Up Plus this week. I noticed that mine up Has an improved extruder mounting bracket. Or at least I think it is. The bracket is not made from thin sheetmetal but from stainless steel that is 3 mm thick. I wanted to apply this upgrade http://www.thingiverse.com/thing:16710 from Drew. ...
by D3rax
Fri Feb 08, 2013 3:42 pm
Forum: Look! My Mod
Topic: Up! Mini - Extruder temperature mod
Replies: 28
Views: 45360

Re: Up! Mini - Extruder temperature mod

Yes you should be able to use that filament and you can probably use the PLA without any temperature mod but you will want to get a fan blowing on your print as this will improve PLA print quality. Tanks for your reply! Do you know what the temperature of the PLA settings is on the Up! ? And regard...
by D3rax
Fri Feb 08, 2013 1:38 pm
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

Hallo Matthijn, Ik ben wel benieuwd naar jouw ervaringen met de nylon van Formfutura. Ik zag dat op 245 graden het beste resultaat wordt behaald. Betekent volgens mij dat de UP! op de ABS stand net te warm is en op de PLA waarschijnlijk te koel (weet jij trouwens op welke temperatuur de PLA stand st...
by D3rax
Thu Feb 07, 2013 8:26 pm
Forum: Netherlands
Topic: Details in Dutch
Replies: 37
Views: 53389

Re: Details in Dutch

Hallo, Ik heb een Up! Plus besteld. Ik ben nu aan het kijken waar ik het voordeligst ABS en PLA kan bestellen. Voor de OEM ABS ben ik pp3dp.nl tegen gekomen, deze kost € 0,056 per gram inc. verzendkosten. Voor third pary fillament kom ik bij Formfutura.com uit, waar ABS en PLA slechts € 0,034 per gr...
by D3rax
Thu Feb 07, 2013 8:22 pm
Forum: Look! My Mod
Topic: Up! Mini - Extruder temperature mod
Replies: 28
Views: 45360

Re: Up! Mini - Extruder temperature mod

Can I do this to on the Up! Plus? On what temperature does the Up! plus extrude ABS? And PLA? Can i use the same solderplan for the Up! Plus? I want to use the following fillament: http://www.formfutura.com/abs-pla-clear-cut-transparent-plastic-3d-printing-filament-1.75mm-3mm/ The temperature for PL...