Search found 194 matches

by 3DWP
Sat Nov 11, 2017 9:36 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

. Fix the bad up software before going live. Just my hints :shock: I agree but somehow they transcode this to their machine code, their other gcode compatible printer the Cetus also this high multiplier for some reason. On another note about bad software, this whole cloud thing and printer activati...
by 3DWP
Fri Nov 10, 2017 9:22 pm
Forum: UP BOX & UP BOX+
Topic: Print Preview Bug!
Replies: 5
Views: 6279

Re: Print Preview Bug!

I want to print something and this is just an annoying software bug.. Have the same popup.

I have added virtual material and even changed the type but still this pops up and I can't print with Up Studio. I can print with gcode so there is something wrong here in the software..
by 3DWP
Fri Nov 10, 2017 7:25 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

Good stuff. I wonder if this is a scaling error or an offset? That is to say if a 20mm cube measures 20.2 will a 200mm cube measure 200.2mm or 202mm? Owen S. I have been testprinting a lot with version 2.0.1.3, currently I have the extrusion multiplier set to 25.00 and see that the direction from f...
by 3DWP
Wed Nov 08, 2017 7:28 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

So I have reprinted the calibration cube with Up Studio 2.0.1.3 and the Y axis is now 20.10 mm, the X axis 19.95 mm. So there is probably a difference between this and the newest Up Studio. I had the extrusion multiplier set to 28.00 for this ABS I use, maybe just a bit too high but it's in the righ...
by 3DWP
Wed Nov 08, 2017 1:37 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

No worries ;) Then maybe the latest Up Studio introduced a calibration error. I have seen this before with their other project, the Cetus printer and Cetus Studio. They adjusted something in an update so all axes were the same again after mentioning this. I can try to print the same gcode in the old...
by 3DWP
Tue Nov 07, 2017 5:46 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

OK, that sounds good. I'll set that up. I don't know why that text came up there but page4.jpg is the picture that is shown (page 4 of the manual) :) I have been testing gcode but have found something that I hope can be fixed (by Tiertime). Normally you can calibrate a gcode printer by for instance ...
by 3DWP
Tue Nov 07, 2017 10:44 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

On page 4 in the gcode manual. Do we have to change this every time we switch 3D printers in Simplify3D? I have more printers but never touched these settings so don't want to mess Up other printers..

[img]
page4.JPG
page4.JPG (133.53 KiB) Viewed 13158 times
[/img]
by 3DWP
Mon Nov 06, 2017 7:27 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

Ah, OK. I tried a few times to see if I missed something and indeed I saw a blue flash ;) So, I found the upgrade CPU I bought last year (leave no Up'ers behind) and low and behold, my Up Box(+) starts immediately after uploading the gcode. I used your S3D profile but I'm still not sure about that f...
by 3DWP
Mon Nov 06, 2017 11:54 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

OwenSparks wrote:The loading file animation in the new Studio is nice.

Owen S.
What do you mean by this?
by 3DWP
Sun Nov 05, 2017 6:43 pm
Forum: UP BOX & UP BOX+
Topic: my up box can't initialize and beeping continuously
Replies: 5
Views: 4575

Re: my up box can't initialize and beeping continuously

Did you ever get this resolved?

I had the same with my Up Box after uploading a gcode, now my printer will not initialize anymore.

I contacted support but they said my Up Box isn't under warranty anymore :x
by 3DWP
Sun Nov 05, 2017 5:56 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

They released a new beta, 2.1.0.8:

1. Fixed printing issues with G-code file.

I have tried to upload a gcode that works on an Up Box+ but my Up Box still doesn't work with it, ''Failed to load gcode''
by 3DWP
Thu Nov 02, 2017 5:27 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

I got a response from Tiertime on the Up Box gcode problem. They say it might be the SD card and that I have to format it as FAT32. I can try but I doubt the Up Box and Up Box+ have different SD cards/formatting. I'll keep you updated. Edit: I have checked and the SD card IS ALREADY FAT32 formatted....
by 3DWP
Wed Nov 01, 2017 9:51 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

I have used the Up Studio help feature and got an email back. I have given all info but only got the response that the tutorial has been uploaded here. I replied that I have already used that and that it works for Up Box+ and not for my Up Box machines.. In the latest software nothing happens, in 2....
by 3DWP
Mon Oct 30, 2017 6:31 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

I have installed 2.0.1.3 beta again and do get different results:

Error: gcode failed to run..

What's going on here? I would love some feedback and help from Tiertime. Finally gcode but no way to use it..
by 3DWP
Mon Oct 30, 2017 11:53 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

Thanks Owen. I have set up S3D 4.0, sliced a file and opened Up Studio 2.0.2.0. Then I intialize the Up Box and open the gcode, I get the warning, click OK and then nothing. I can initialize the Box or do other things in Up Studio but the gcode upload triggers nothing - also no progress of upload or...
by 3DWP
Mon Oct 30, 2017 10:40 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

OK, so software -may- be the issue. Why am I not surprised :x Owen, what version did you use succesfully so I can try that? Once again, my Up Box doesn't react in any way to this gcode tutorial. I asked Tiertime and they say they will release a gcode tutorial when it is finished.. Is that a new one ...
by 3DWP
Sat Oct 28, 2017 1:23 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

I'm finally trying to print gcode, went through all the settings from Tiertime and checked this thread but my Up Box isn't doing anything..

No progress, heating or a sound, nothing.

Could you maybe share your settings or profile here again?
by 3DWP
Sat Oct 07, 2017 11:19 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

The biggest issue is the lack of layer preview. That has puzzled me for years, that is the most asked for feature and I have used their ModelWizard software for the Inspire range of printers since about 2011 which has that built in. You can see each layer and support, in 3D and 2D. In those days I ...
by 3DWP
Sat Oct 07, 2017 9:10 am
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

Honestly...it would be more cost effective for them to use something that is already on the market, with all the features that users are begging for, then to try and recreate lightening in a bottle and build their own software package. Preaching to the choir ;) But I think Tiertime put so much effo...
by 3DWP
Wed Oct 04, 2017 3:41 pm
Forum: UP Software
Topic: UPStudio G-code Tutorial
Replies: 159
Views: 93754

Re: UPStudio G-code Tutorial

I'm dying to try this but just haven't had the time, sorry. But I will share my findings as soon I have time. Thanks you guys for sharing your work here, it is really appreciated. I can share my Cetus S3D settings I had dialed in after measuring a 20 mm cube some time ago, these could also apply to ...