Search found 303 matches

by scubamatt41
Sun Mar 22, 2015 5:28 pm
Forum: General Discussion
Topic: 3d CLIP technologie
Replies: 0
Views: 1839

3d CLIP technologie

by scubamatt41
Thu Mar 12, 2015 4:32 pm
Forum: Coffee Place
Topic: Formfutura Flexifil
Replies: 3
Views: 5278

Re: Formfutura Flexifil

Numonic wrote:Nice do you use any mold release?
No mold release because the model is not that big nor complex. Otherwise???????
by scubamatt41
Mon Feb 16, 2015 10:45 am
Forum: Look! My Mod
Topic: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !
Replies: 139
Views: 93287

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Hi and thanx for setting my UP mini free. Would it to much to ask for some sort of manual?

Cheers
by scubamatt41
Tue Feb 10, 2015 10:36 am
Forum: Coffee Place
Topic: Formfutura Flexifil
Replies: 3
Views: 5278

Formfutura Flexifil

I have been experimenting with Flexifil from Formfutura to make soap molds. Normal extrusion temp should be around 210C so that means PLA setting but that doesnt work. The flexifil would only extrude on ABS setting. On that setting it would only extrude one time and that turned out to be beginners l...
by scubamatt41
Mon Feb 02, 2015 8:11 am
Forum: Germany
Topic: FilaFlex-Filament
Replies: 1
Views: 1988

Re: FilaFlex-Filament

Hi, I can read german, but not write it. I read on the Inet that the gap between extruder gear and the inlet of the extruder tube should be minimal. (when printing with flexible filaments) I am expecting a rol of flexifil ( diff brand ) from formfutura. I read an review in which it was extruded at 2...
by scubamatt41
Mon Jan 19, 2015 12:50 pm
Forum: UP Plus
Topic: Form Futura Flex EcoPLA not sticking to the bed
Replies: 3
Views: 2365

Re: Form Futura Flex EcoPLA not sticking to the bed

Yes Hi,

I found a type of plastic from which I made build sheets to fit my mini 140mmX140mmx3mm.
All known filaments stick to it like grazy. I can send you some If you want. Just PM me

Cheers
by scubamatt41
Wed Jan 14, 2015 9:27 am
Forum: Netherlands
Topic: UP mini te koop!
Replies: 9
Views: 8279

Re: UP mini te koop!

Nee idd bitflusher, geen gek bod, nu ruim 1.5 jaar later. Ik zal er over nadenken :?: Ik ben namelijk bezig met emigreren. Het verhuizen + het feit dat ik dan voorlopig geen tijd heb om te printen was een reden om de printer te koop te zetten. Daarnaast wil ik wanneer ik weer in de print gelegenheid...
by scubamatt41
Wed Jan 07, 2015 7:04 pm
Forum: Netherlands
Topic: UP mini te koop!
Replies: 9
Views: 8279

Re: UP mini te koop!

Duidelijk bod?
by scubamatt41
Mon Jan 05, 2015 11:36 am
Forum: Look! My Mod
Topic: Understanding UP! Rom file format ==> Need USB Capture
Replies: 39
Views: 21126

Re: Understanding UP! Rom file format ==> Need USB Capture

nice work!!! is it too soon to ask if there is a step to step for what we need to do to change the temp?

Just read your german post. I understand you are still testing?
by scubamatt41
Thu Dec 11, 2014 5:49 pm
Forum: UP Plus
Topic: Question about model numbers!
Replies: 8
Views: 4840

Re: Question about model numbers!

Spaghetti!!! Noodles!!!
by scubamatt41
Tue Dec 02, 2014 4:18 pm
Forum: General Discussion
Topic: cleaning perf boards without scraping them
Replies: 15
Views: 8609

Re: cleaning perf boards without scraping them

The board I use I made it myself. It is 4mm thick and has 2mm holes in a offset pattern. I used that one board for almost one year now. Each and every print is 100% okay. Using raft is a must with this board. For cleaning I use the painters knife which came with my UP mini. Also I swithed back to UP...
by scubamatt41
Thu Oct 30, 2014 8:39 am
Forum: Other 3D Printing Topics
Topic: Renkforce
Replies: 1
Views: 2035

Re: Renkforce

Anyone?
by scubamatt41
Fri Oct 24, 2014 11:48 am
Forum: Other 3D Printing Topics
Topic: Renkforce
Replies: 1
Views: 2035

Renkforce

Is anyone familiar with the Renkforce 3D printer? https://www.conrad.nl/nl/renkforce-rf1000-3d-printer-1007508.html http://www.youtube.com/watch?v=gfIGqr7d5FM http://www.youtube.com/watch?v=S5MZwIG8ERo Last night I spoke to a man in my local fablab. He does not get the machine to work. Does anyone h...
by scubamatt41
Thu Oct 16, 2014 5:29 pm
Forum: Coffee Place
Topic: Coffee please. dash of milk, no sugar
Replies: 11
Views: 7061

Re: Coffee please. dash of milk, no sugar

Well, about that friend of mine? I bought him a sheet of the same plastic as I have only this was made to fit the Ultimaker. He was just over the moon with the results. He's really concidering not to use Masking tape at all. He shared some pictures and said it was okay if I posted them. Filament use...
by scubamatt41
Wed Oct 15, 2014 4:16 pm
Forum: Coffee Place
Topic: Coffee please. dash of milk, no sugar
Replies: 11
Views: 7061

Re: Coffee please. dash of milk, no sugar

Why would you want Cura? You lose all your removable support! Anyway I am not sure of our question. We don't use rafts on repraps (ultimaker kinda fall in that family) because we can't readily remove the raft ... simple at that. By using a raft (now quite minimal) we use extra plastic but get rid o...
by scubamatt41
Wed Oct 15, 2014 2:07 pm
Forum: Coffee Place
Topic: Coffee please. dash of milk, no sugar
Replies: 11
Views: 7061

Coffee please. dash of milk, no sugar

Someone I know owns an Ultimaker. He uses the original build plate with blue tape which mostly doesn't work. Mostly it only works after applying something extra like glue or some other experimental solution. He hates it when a print of lets say 16 hours in total fails after 15hours (who would not) b...
by scubamatt41
Mon Sep 15, 2014 5:44 am
Forum: UP Plus
Topic: Another solution for PLA printing?
Replies: 7
Views: 4128

Re: Another solution for PLA printing?

Blue tape you have to buy forever or a special plate only ones that can print a totaly flat surface? Hmm
by scubamatt41
Thu Sep 11, 2014 1:57 pm
Forum: UP Plus
Topic: Another solution for PLA printing?
Replies: 7
Views: 4128

Re: Another solution for PLA printing?

Hi D3rax, A step towards successful printing with PLA could be the sheets I make. In this case I made one for the Ultimaker which is printing a larger surface than in the films as I write this. To get an idea I would like to refer to a youtube post I made. The bed on the Ultimaker is nonheated!!! I ...
by scubamatt41
Wed Sep 03, 2014 7:50 am
Forum: UP Software
Topic: Latest software / ROM ?
Replies: 10
Views: 7270

Latest software / ROM ?

Hi all,

What are the latest software and ROM versions?

cheers
by scubamatt41
Mon Aug 18, 2014 8:09 pm
Forum: Website and Forum
Topic: reload
Replies: 2
Views: 1934

reload

Anybody else need to reload pp3dp.com/forum a couple of times before it's there?