Search found 33 matches

by 3DSTB
Mon May 16, 2016 8:09 pm
Forum: UP mini
Topic: leaking nozzle
Replies: 4
Views: 4345

Re: leaking nozzle

i had the same problem. I glowed the nozzle and also the part of the Heater. the contact surfaces must be clean. After that it schould be possible the toghten the nozzle right.
by 3DSTB
Mon May 16, 2016 8:02 pm
Forum: Look! My Mod
Topic: UP Mini raftless ABS printing with PEI success
Replies: 7
Views: 7396

Re: UP Mini raftless ABS printing with PEI success

http://www.amazon.com/Polyetherimide-Na ... B0013HKZTA

you can make 4 boards. Use a 2mm or thicker borosilikat-glass and use 3M 468MP to fix it on the glass.

On PEi you can print also PLA !
by 3DSTB
Mon Apr 04, 2016 9:13 pm
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 45710

Re: G-Code transcoder part 3 (printing objects)

oh sorry it works. i was a typing error in the input file. :oops:
by 3DSTB
Mon Apr 04, 2016 8:37 pm
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 45710

Re: G-Code transcoder part 3 (printing objects)

I just pushed an update to the repository. It contains the option to set nozzle height as additional parameter in up3dtranscode and added a coordinate system translation so objects just sliced with slic3r or simplify3d standard settings will not be mirrored anymore. Maik Hi, the Windows-version is ...
by 3DSTB
Sun Apr 03, 2016 9:15 pm
Forum: Look! My Mod
Topic: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !
Replies: 142
Views: 139905

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Hi,
is it possible to make a switch button for the heat-bed into the fixup3d mod? I use a glasbed with hairspray and i like to get the bed heated til the end of the print. Now i tel the software that im using ABS to print PLA with heated bed.
Thanks
3DSTB
by 3DSTB
Thu Mar 31, 2016 8:27 pm
Forum: Germany
Topic: Ab in den Keller?
Replies: 15
Views: 10000

Re: Ab in den Keller?

Hab mir auch einen Raspi 3 gegönnt und mich hier langgehangelt: Raspian Jessie Lite Image installiert: http://www.raspifun.de/viewtopic.php?t=4 Raspi 3 mit Netzwerkkabel ins Netzgebracht und WLAN eingerichtet: http://jankarres.de/2016/03/raspberry-pi-3-wlan-einrichten/ Virtualhere auf Raspi 3 über S...
by 3DSTB
Wed Mar 30, 2016 7:19 am
Forum: Germany
Topic: Ab in den Keller?
Replies: 15
Views: 10000

Re: Ab in den Keller?

Der Raspberry ist wohl eher ein verlängertes USB-Kabel. Auf ihm läuft nur die Übertragung der USB-Daten zu deinem Rechner mit der UP!-Software. Man installiert Virtualhere auf dem RAspberry. Damit werden alle USB-Geräte am RAspberry weitergeleitet. In der kostenloesen Version 1 Gerät (reicht ja). Au...
by 3DSTB
Tue Mar 22, 2016 10:13 am
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 45710

Re: G-Code transcoder part 3 (printing objects)

Hi, i compiled the up3dtranscode.exe with the updated up3dtranscode.c (added nozzle height manual input) https://github.com/MaikStohn/UP3D/pull/2/commits/38f13ec18b00ed7a9398fce8a8bc07e5b756db57 My question now: Is the value the same as in the UP! Software (e.g. 123.3) or is it something with a corr...
by 3DSTB
Wed Mar 16, 2016 10:55 am
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 45710

Re: G-Code transcoder part 3 (printing objects)

Hi, thank you compiling is working now.
What is the correction value for the nozzle height? E.g. 123.23 in the UP Soft becomes 123.53? Is the the second decimal place considered?
by 3DSTB
Tue Mar 15, 2016 10:04 pm
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 45710

Re: G-Code transcoder part 3 (printing objects)

Syntax in MINGW32 is correct?

gcc hoststepper.c hostplanner.c gcodeparser.c up3ddata.c umcwriter.c up3dtranscode.c -o up3dtranscode.exe
by 3DSTB
Tue Mar 15, 2016 12:07 pm
Forum: Germany
Topic: Tchibo hat den Mini wieder im Angebot
Replies: 15
Views: 11551

Re: Tchibo hat den Mini wieder im Angebot

neuer 15%-Gutschein bei Tchibo:
START16
by 3DSTB
Thu Mar 10, 2016 9:05 am
Forum: Look! My Mod
Topic: G-Code transcoder part 3 (printing objects)
Replies: 57
Views: 45710

Re: G-Code transcoder part 3 (printing objects)

are the settings in Symplify3D ok?
Image
by 3DSTB
Tue Mar 08, 2016 12:00 pm
Forum: Germany
Topic: Tchibo hat den Mini wieder im Angebot
Replies: 15
Views: 11551

Re: Tchibo hat den Mini wieder im Angebot

Aktuell im Angbot bei tchibo:

https://www.tchibo.de/3d-drucker-up-min ... 81858.html

349,-

mit Gutschein "MOBILE16" nur 296,65

Funktioniert (gerade bestellt)
by 3DSTB
Thu Mar 03, 2016 1:57 pm
Forum: Look! My Mod
Topic: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !
Replies: 142
Views: 139905

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Hi,
i have one question. I want a heated print bed (50 °C) when i print PLA raftless on PEI. Can i just set material to ABS which gives me a heated print bed and then just reduce the nozzle temp with this mod? Or is there any other difference between ABS and PLA mode?
Thanks
3DSTB
by 3DSTB
Thu Mar 03, 2016 1:15 pm
Forum: UP mini
Topic: Replacement parts linear bearing y-axis (Table)
Replies: 2
Views: 3448

Replacement parts linear bearing y-axis (Table)

one of linear bearings is at end of life after 4 weeks. What kind of replacementpart can i use?
by 3DSTB
Thu Mar 03, 2016 11:39 am
Forum: Look! My Mod
Topic: UP Mini raftless ABS printing with PEI success
Replies: 7
Views: 7396

UP Mini raftless ABS printing with PEI success

Hi, im able to print ABS raftless with no warping with PEI. http://up.picr.de/24764024ql.jpg Bed has to leveled to no tilt. That was not easy. This works well with 0.1mm and 0.2mm layer (Soft-Mod). On the Pic is a print with 0.1mm. nozzle must be as close as possible to the bed (0.1mm or little bit ...
by 3DSTB
Fri Feb 12, 2016 7:41 pm
Forum: Look! My Mod
Topic: Cooling Mod Extruder and Stepper
Replies: 0
Views: 3331

Cooling Mod Extruder and Stepper

Hi, i just want to show my cooling mod. 4 weeks ago i found this: https://www.thingiverse.com/thing:879804 Additionally i put some pin heatsinks with Artic Silver on the stepper http://www.fischerelektronik.de/web_fischer/en_GB/heatsinks/B03/Pin%20heatsinks/search.xhtml;jsessionid=4239C2B8B5FFDFA388...
by 3DSTB
Fri Feb 12, 2016 6:22 pm
Forum: UP mini
Topic: change color/filament during print
Replies: 5
Views: 5389

change color/filament during print

is is possible to change to color/filament during print? In the print options is a stop/break at layer .... Can i use this to stop the print change the filament, extrude until the color is ok and resume the print?