Print quality of the new colored ABS?

Coffee place for all the Uppers. Discuss about UP techniques, sharing ideas and tips. Coffee is on the house. :)
Chris.e
Posts: 190
Joined: Wed Sep 15, 2010 10:05 am
Contact:

Print quality of the new colored ABS?

Post by Chris.e » Tue Oct 02, 2012 10:14 am

Has anyone tried the (for me) new color ABS from PP3DP? It's probably as good as the white but has anyone had chance to try it yet?
Cheers!

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: Print quality of the new colored ABS?

Post by eyUP » Tue Oct 02, 2012 10:38 am

Yes - see here:
https://isupply3d.com/UP-Printer-Sectio ... r-filament

Each coloured spool has extra images of prints - just remember the actual colour may differ due to lighting conditions when photographed.
For me the Black is the most impressive :)

User avatar
JuliaDee
Posts: 959
Joined: Sun May 06, 2012 10:00 pm
Location: Connecticut
Contact:

Re: Print quality of the new colored ABS?

Post by JuliaDee » Wed Oct 03, 2012 1:48 am

I bought a spool of black, and it's really, really good. Light years beyond any other black I've tried.

julia

amd-tec
Posts: 286
Joined: Sun Apr 15, 2012 6:16 am
Contact:

Re: Print quality of the new colored ABS?

Post by amd-tec » Wed Oct 03, 2012 3:25 pm

I bought also black filament, working great, looks nice. Will post
pics later.
"3D design with intelligent printing"
http://www.amd-tec.com

amd-tec
Posts: 286
Joined: Sun Apr 15, 2012 6:16 am
Contact:

Re: Print quality of the new colored ABS?

Post by amd-tec » Wed Oct 03, 2012 7:55 pm

amd-tec wrote:I bought also black filament, working great, looks nice. Will post
pics later.
Here`s one.
Note it`s printed with 0.3 mm layer.
Attachments
b1-2.jpg
Black color
b1-2.jpg (66.04 KiB) Viewed 22098 times
"3D design with intelligent printing"
http://www.amd-tec.com

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: Print quality of the new colored ABS?

Post by eyUP » Thu Oct 04, 2012 8:43 am

Yep, Black seems the best so far but Blue isn't bad either...
Attachments
blue-part.jpg
blue-part.jpg (37.41 KiB) Viewed 22071 times

UPUPandAway
Posts: 57
Joined: Sun Aug 14, 2011 6:02 pm

Re: Print quality of the new colored ABS?

Post by UPUPandAway » Mon Oct 08, 2012 7:06 pm

Man, that black does look good!

I'm so pissed about this, I bought 2 spools of natural ABS and then the colored spools debuted like a week or two later! I've been wanting to print in black for so long...

Does the black hide imperfections as well as the natural, though? Does it have that "softening" effect on the ridges to make it look better at a glance? It's hard to tell from pictures as things always look more ribbed in photos.

User avatar
wilsonj
Posts: 569
Joined: Tue Feb 28, 2012 10:26 pm
Location: Australia

Re: Print quality of the new colored ABS?

Post by wilsonj » Mon Oct 08, 2012 9:42 pm

I generally find the darker the filament the more it shows the layers. Regardless of the brand. The whites and creams look best in this regard. Black the worst.
Regards
Jamie
3DPrinterGear.com.au

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: Print quality of the new colored ABS?

Post by eyUP » Tue Oct 09, 2012 8:34 am

I generally find the darker the filament the more it shows the layers. Regardless of the brand. The whites and creams look best in this regard. Black the worst.
I'd normally agree with this but the official black has a matt surface to it which seems to reduce the visibility of the layers when compared to other colors.
I'll have to post some more photos when I get a minute...

jspark
Posts: 60
Joined: Thu Aug 02, 2012 8:20 am
Contact:

Re: Print quality of the new colored ABS?

Post by jspark » Tue Oct 09, 2012 3:27 pm

That's right.. the matt surface looks more nice than glosy surface.
I like OEM filament's matt feeling of the surface.
I think the worst looking filament is the plaster like grey filament.
It shows true layers, so not good looking.
But lots of modelers like that filament because it can make the exact post work on surface.
Following photo as for example.
The grey model partly sanded. it looks nice.
She looks 20 years older than others because of my bad post work skill. :)

Image

User avatar
wilsonj
Posts: 569
Joined: Tue Feb 28, 2012 10:26 pm
Location: Australia

Re: Print quality of the new colored ABS?

Post by wilsonj » Tue Oct 09, 2012 8:17 pm

eyUP wrote:
I generally find the darker the filament the more it shows the layers. Regardless of the brand. The whites and creams look best in this regard. Black the worst.
I'd normally agree with this but the official black has a matt surface to it which seems to reduce the visibility of the layers when compared to other colors.
I'll have to post some more photos when I get a minute...
Interesting. I have a mat black filament, but I haven't tried printing with it yet. Perhaps it will be better than the normal glossy black.

Incidentally I have a Stratasys Mojo sample in ivory and their filament is SUPER glossy. Not sure if that is an effect from the bath or how it comes out normally.
jspark wrote:That's right.. the matt surface looks more nice than glosy surface.
I like OEM filament's matt feeling of the surface.
I think the worst looking filament is the plaster like grey filament.
It shows true layers, so not good looking.
But lots of modelers like that filament because it can make the exact post work on surface.
Following photo as for example.
The grey model partly sanded. it looks nice.
She looks 20 years older than others because of my bad post work skill. :)
Great comparison shots jspark! I need a macro lens! :D
Regards
Jamie
3DPrinterGear.com.au

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: Print quality of the new colored ABS?

Post by eyUP » Fri Oct 12, 2012 2:51 pm

Here is another item using the official black ABS. Also printed at 0.15 :D
Attachments
Valve.jpg
Valve.jpg (33.56 KiB) Viewed 21876 times

Chris.e
Posts: 190
Joined: Wed Sep 15, 2010 10:05 am
Contact:

Re: Print quality of the new colored ABS?

Post by Chris.e » Tue Oct 16, 2012 7:54 am

Thanks!
It looks like it behaves pretty well :) Do you clean out the extruders before changing color or does the previous color disappear pretty quick after changing?

eyUP
Posts: 230
Joined: Thu May 24, 2012 3:23 pm

Re: Print quality of the new colored ABS?

Post by eyUP » Tue Oct 16, 2012 8:00 am

It looks like it behaves pretty well Do you clean out the extruders before changing color or does the previous color disappear pretty quick after changing?
One or two extrudes is enough to see a consistent new color...I've never had to clean a nozzle

User avatar
woofy
Posts: 118
Joined: Thu Mar 15, 2012 8:09 pm

Re: Print quality of the new colored ABS?

Post by woofy » Tue Oct 16, 2012 9:02 am

Does anyone know where to buy this in the UK?
The only place I'm aware of is iSupply3D, but they only sell twin packs and that makes it very expensive to buy one of each colour.
UP plus, Ultimaker2 & Raise N2+ Printers.

Have Blue
Posts: 30
Joined: Tue Aug 24, 2010 12:38 am

Re: Print quality of the new colored ABS?

Post by Have Blue » Fri Oct 19, 2012 2:07 pm

wilsonj wrote:Interesting. I have a mat black filament, but I haven't tried printing with it yet. Perhaps it will be better than the normal glossy black.

Incidentally I have a Stratasys Mojo sample in ivory and their filament is SUPER glossy. Not sure if that is an effect from the bath or how it comes out normally.
Could be from a finishing bath, but the Mojo uses SABIC MG94 resin (what they call 'ABSplus'), while the Standard Stratasys P400 ABS is a very low-gloss material (and it's quite possible that Beijing Tiertime is using the exact same resin - likely Dow Magnum AG700).

Fred
Posts: 42
Joined: Wed Jul 04, 2012 8:31 pm

Re: Print quality of the new colored ABS?

Post by Fred » Tue Oct 23, 2012 6:33 pm

I'm only just getting started with my Up (which I won on Instructables) but I may be interested in going halves with you on a twin pack.

Fred (in Surrey, UK)

User avatar
woofy
Posts: 118
Joined: Thu Mar 15, 2012 8:09 pm

Re: Print quality of the new colored ABS?

Post by woofy » Tue Oct 23, 2012 7:20 pm

Hi Fred,

Cool components will soon be stocking the oem colours.
Hopefully they will sell single rolls as they do with the white.
UP plus, Ultimaker2 & Raise N2+ Printers.

Fred
Posts: 42
Joined: Wed Jul 04, 2012 8:31 pm

Re: Print quality of the new colored ABS?

Post by Fred » Fri Oct 26, 2012 1:04 pm

I just asked Cool Components and they're expecting to have the coloured ABS in about a week. I didn't ask whether they'd sell as single reels, but no reason to think they wouldn't as that's now they current sell the white.

jlamarche
Posts: 3
Joined: Mon Oct 01, 2012 9:35 pm

Re: Print quality of the new colored ABS?

Post by jlamarche » Sun Oct 28, 2012 3:41 pm

eyUP wrote:Here is another item using the official black ABS. Also printed at 0.15 :D
Umm.... how do you print at .15? My settings only go down to .2? Does the printer support higher resolutions?

Post Reply