Hello,
So I have multiple models and problem occurs when I open them in software then some parts are showing red ( they will not be printed correctly), even I fix them. Why does this problem occur?
Thanks in advance
Software - Red parts
Re: Software - Red parts
Hi Tridament,
Sometimes there is a modeling error, could be walls are too thin in some areas sometimes there are internal issues. What software are you using to model your object is it cad, or a package like Maya or Blender?
Sometimes there is a modeling error, could be walls are too thin in some areas sometimes there are internal issues. What software are you using to model your object is it cad, or a package like Maya or Blender?
Re: Software - Red parts
Sometimes it helps when after FIX-command push the orientation button, choose ex. the FIT option and try this.
Thanks,
Thanks,
"3D design with intelligent printing"
http://www.amd-tec.com
http://www.amd-tec.com
Re: Software - Red parts
Also sometimes after using "fix" the part shows same or other errors on a few occasions the following has worked.
Save the print model using the UP software this saves it as a up3 model. Then reopen the up3 model.
cheers
Peter
Save the print model using the UP software this saves it as a up3 model. Then reopen the up3 model.
cheers
Peter
- wackojacko
- Posts:667
- Joined:Fri Nov 12, 2010 5:46 am
- Contact:
Re: Software - Red parts
The best thing for fixing "Red" parts in your UP software is to wash them through Netffab cloud.
https://netfabb.azurewebsites.net/
https://netfabb.azurewebsites.net/
Bruce
http://www.3DPrintingSystems.com
Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists
http://www.3DPrintingSystems.com
Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists
Re: Software - Red parts
usually after modeling, you should use modeling repair software to repair the model before slicing to print. netfabb basic is free repair software.
通常在建模之后,需要用修复软件对模型进行修复,之后再切片打印。
通常在建模之后,需要用修复软件对模型进行修复,之后再切片打印。
-
- Posts:1
- Joined:Thu Apr 11, 2019 10:14 am
Re: Software - Red parts
Is this software suitable for android device? I am using Lenovo Phone. Hope we will get useful ideas from you.
-
- Posts:35
- Joined:Mon Feb 18, 2019 6:14 am
Re: Software - Red parts
Dear Customer,
I'm sorry than we don't have android version.
I'm sorry than we don't have android version.