System Motion Error 5

Share your experience with UP mni 2 ES!
Post Reply
GACUser
Posts: 2
Joined: Fri Mar 01, 2019 1:48 pm

System Motion Error 5

Post by GACUser » Thu Mar 07, 2019 1:56 pm

Just bought the mini 2 and set it. Did an initialization and then tried to calibrate and got the following error message:
System Motion Error 5

I opened a ticket 7 days ago and still haven't gotten a response.

Anyone experience this?

bjorn
Posts: 172
Joined: Fri Aug 10, 2018 6:00 pm

Re: System Motion Error 5

Post by bjorn » Fri Mar 08, 2019 8:41 am

Not getting a response is, in my experience, quite common yes.

Can you freely move all the axis by hand while the power is off? (move slowly and feel for any change in friction) Which direction is printer moving in when you get the error?

GACUser
Posts: 2
Joined: Fri Mar 01, 2019 1:48 pm

Re: System Motion Error 5

Post by GACUser » Tue Mar 12, 2019 1:43 pm

It moves freely back and forth when the power is off. The error occurs when it goes up and the metal piece touches the nozzle and then on the way down it stutters and pops the error.

Post Reply