Impossbile Calibration

Support for UP300. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
allineatorisorridi
Posts: 9
Joined: Thu Mar 14, 2019 1:40 pm

Impossbile Calibration

Post by allineatorisorridi » Mon Mar 18, 2019 3:36 pm

Hi everyone, i've a problem with my new up300.
I can't calibrate correctly the plate, when is ok in the back side is too high on the front and viceversa.
I've tried both auto and manual mode.

Thanks in advance
Top
cj7hawk
Posts: 103
Joined: Tue Dec 25, 2012 7:52 am

Re: Impossbile Calibration

Post by cj7hawk » Fri Mar 22, 2019 1:54 pm

Calibrating it manually should still work. They include a card for doing it manually.

At what point does the process fail for you?
Top
allineatorisorridi
Posts: 9
Joined: Thu Mar 14, 2019 1:40 pm

Re: Impossbile Calibration

Post by allineatorisorridi » Tue Apr 09, 2019 9:33 am

Solved thanks
Top
Owen Sparks aka Marksman
Posts: 610
Joined: Tue Mar 15, 2016 9:56 am

Re: Impossbile Calibration

Post by Owen Sparks aka Marksman » Wed Apr 10, 2019 7:16 am

allineatorisorridi wrote: ↑
Tue Apr 09, 2019 9:33 am
 Solved thanks
It's always helpful if people post how they solved their problem. :| As it happens I'm having calibration problems at the moment too, perhaps your fix is what I need? A bit of give and take is always welcome.

Owen S.
Top
allineatorisorridi
Posts: 9
Joined: Thu Mar 14, 2019 1:40 pm

Re: Impossbile Calibration

Post by allineatorisorridi » Wed Apr 10, 2019 9:05 am

Sorry i was in a hurry! Under the plate there are 4 thumbscrew for adjusting it!! :lol:
Top
Post Reply

Return to “UP300”