Page 1 of 1

Up Mini 2 board mod

Posted: Thu May 23, 2019 5:21 pm
by masrodjie
I've plan to mod the board for my up mini 2.
I just found on the aliexpress, there are adapter board for extruder. It's for UP! PP3DP TIERTIME 3D AFINIA.
Is it also compatible with UP Mini 2?
https://www.aliexpress.com/item/32834163766.html
Image

Re: Up Mini 2 board mod

Posted: Tue May 28, 2019 3:17 pm
by Owen Sparks aka Marksman
Adapt it to do what?

Re: Up Mini 2 board mod

Posted: Fri Jun 07, 2019 9:18 pm
by arhi
no it is not .. that is board that goes to up plus 2 and similar printers, mini2 have different board on extruder ... that one might have same pinout for the imput but the position of the connectors is different on the one on mini2

Re: Up Mini 2 board mod

Posted: Sat Jun 08, 2019 2:57 am
by masrodjie
arhi wrote:
Fri Jun 07, 2019 9:18 pm
no it is not .. that is board that goes to up plus 2 and similar printers, mini2 have different board on extruder ... that one might have same pinout for the imput but the position of the connectors is different on the one on mini2
Ok thank you. I thought it has same position of the connector with up mini 2. I've plan to change the board for up mini 2. If the connector is compatible, it would be simplify for the board connector

Re: Up Mini 2 board mod

Posted: Sat Jun 08, 2019 4:47 pm
by bjorn
If you want to keep the extruder but replace the main board, maybe this could be a cheaper solution?
https://www.thingiverse.com/thing:3465278

(Its pictured at the hotend, but I made it for the other end, worked well for using with a Duet2Maestro in my up mini 2)