first starting point Nozzle .. moving

Share your experience with UP mni 2!
Post Reply
krienter
Posts: 1
Joined: Fri Oct 13, 2017 5:56 am

first starting point Nozzle .. moving

Post by krienter » Fri Apr 19, 2019 6:27 am

my first print start very well

but after print moving nozzle

how can i printing...
Attachments
KakaoTalk_20190419_141930901.jpg
KakaoTalk_20190419_141930901.jpg (1.76 MiB) Viewed 686 times

Owen Sparks aka Marksman
Posts: 610
Joined: Tue Mar 15, 2016 9:56 am

Re: first starting point Nozzle .. moving

Post by Owen Sparks aka Marksman » Tue Apr 23, 2019 11:48 am

Looks to me that you raft is printing way too high above the build plate. Those lower layers should be squashed down so they look like rectangles, where as yours look like cylinders laid down into air.
Owen S.

Post Reply