Overheating Regularly!

Share your experience with UP mni 2!
Post Reply
Posts: 1
Joined: Sun May 20, 2018 12:24 am

Overheating Regularly!

Post by LucasStacey » Sun May 20, 2018 1:42 am

I just got a UP Mini 2 for my Birthday and its having problems with the nozzle overheating. I have setup the thing according to the instructions sent with the Mini 2. The Nozzle will be at 100% heat and it seems to be good then skyrockets to ~147% and needs to cool down. It doese this 4ish times in 15 minutes when we were trying to print a funnel. We tried a few fixes for it but most are just for the old first gen Mini.

Please help! Re-initializing the printer every 5 minutes is very annoying. :?:

Posts: 4
Joined: Tue Jan 08, 2019 4:02 am

Re: Overheating Regularly!

Post by BobP » Wed Jan 09, 2019 1:38 am

Did you ever resolve this problem ? I have brand new Mini 2 abd have been unable to orint any more than a layer of raft before i get an overheat error ...

Posts: 101
Joined: Tue Oct 16, 2018 8:25 am

Re: Overheating Regularly!

Post by TiertimeBrook » Thu Jan 10, 2019 5:57 am

Try to check the heated plate cable connection with the mainboard or reinsert it from mainboard ,sometimes the bad connection may caused the overheating.

Post Reply