Ventilation blowing side

Share your experience with UP mni 2!
Post Reply
GS
Posts: 12
Joined: Sat Oct 01, 2016 8:38 am

Ventilation blowing side

Post by GS » Thu Oct 06, 2016 1:08 pm

Hello everyone,

I have a very basic question, I cleaned my head but by doing so I forgot in which side my ventilator was blowing :? so at the moment as you can see on the picture the ventilation blows outward and Im pretty sure I should put it back the other way around in order to blow air within the head but since im not sure im asking you guys.

So ventilator should be set to vent the inside of the Head or should it vent outside (maybe evacuating hot air from it :s ?)

THank you for the response.
Attachments
IMG_20161001_120216.jpg
IMG_20161001_120216.jpg (479.06 KiB) Viewed 3850 times

Surge
Posts: 5
Joined: Mon Oct 03, 2016 2:57 am

Re: Ventilation blowing side

Post by Surge » Fri Oct 07, 2016 2:16 am

It should be blowing air down to the nozzle.

GS
Posts: 12
Joined: Sat Oct 01, 2016 8:38 am

Re: Ventilation blowing side

Post by GS » Fri Oct 07, 2016 7:41 pm

ok, thank you, just saw I had 2 notice :s will fix that, anyway, I did do a mistake, thank you !

Post Reply