Calibrating nozzle MINI2

Share your experience with UP mni 2!
Post Reply
zeeb84
Posts: 14
Joined: Fri Aug 12, 2016 12:44 pm

Calibrating nozzle MINI2

Post by zeeb84 » Wed Sep 14, 2016 5:09 pm

Manual says that clicking on the "+" or the "-" button to calibrate nozzle height will adjust the BED accordingly. The LCD screen indicates that to be adjusting the NOZZLE height. My nozzle is slightly too high, and causing the raft to print in loopy fashion. I want to get the nozzle closer to the bed. Am I pushing the "=" or the "-"?

tel
Posts: 242
Joined: Tue Feb 09, 2016 1:35 pm
Location: Australia
Contact:

Re: Calibrating nozzle MINI2

Post by tel » Thu Sep 15, 2016 10:18 am

+ should move the nozzle closer, - moves it further away

zeeb84
Posts: 14
Joined: Fri Aug 12, 2016 12:44 pm

Re: Calibrating nozzle MINI2

Post by zeeb84 » Fri Sep 16, 2016 11:24 am

Thank you will give it a shot

Surge
Posts: 5
Joined: Mon Oct 03, 2016 2:57 am

Re: Calibrating nozzle MINI2

Post by Surge » Mon Oct 03, 2016 3:00 am

After leveling, why not use the automatic nozzle height feature?

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: Calibrating nozzle MINI2

Post by wackojacko » Tue Oct 04, 2016 6:14 pm

To set the value just click the new value and you'll hear a beep and that will set it. I think if you print a model from one of the slots, it will use the old value saved with the model.
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

Post Reply