Page 1 of 1

UP BOX+ Temperature Readings

Posted: Fri Dec 01, 2017 2:15 pm
by hybridhuman69
Hi Guys,

We have literally just unboxed our new UP BOX+ printer and set a test print going.

Can I just ask, is the tempertaure readings correct (see attached picture). Should the extruder and bed temps be running at nearly 100% ???

I'm trying to find in the literature whether that's what they're supposed to be at, or whether the readings are false?!
UPBOXTEMPS.png (174.44 KiB) Viewed 3080 times
Thanks for any advice


Re: UP BOX+ Temperature Readings

Posted: Mon Dec 04, 2017 3:54 pm
by Owen Sparks aka Marksman

It's indicating 100% of the target temp, not of the maximum the machine can run.

So if the material is set to 275 deg and it's at ecactly 275 then it'll show 100%. Or if the target is 200deg. and it's at 202 deg then it'll show 101%

So all is good with your printer :D


Owen S.