UP BOX+ Temperature Readings

Share your experience with UP BOX and UP BOX+
Post Reply
Posts: 1
Joined: Fri Dec 01, 2017 2:09 pm

UP BOX+ Temperature Readings

Post by hybridhuman69 » Fri Dec 01, 2017 2:15 pm

Hi Guys,

We have literally just unboxed our new UP BOX+ printer and set a test print going.

Can I just ask, is the tempertaure readings correct (see attached picture). Should the extruder and bed temps be running at nearly 100% ???

I'm trying to find in the literature whether that's what they're supposed to be at, or whether the readings are false?!
UPBOXTEMPS.png (174.44 KiB) Viewed 3245 times
Thanks for any advice


Owen Sparks aka Marksman
Posts: 610
Joined: Tue Mar 15, 2016 9:56 am

Re: UP BOX+ Temperature Readings

Post by Owen Sparks aka Marksman » Mon Dec 04, 2017 3:54 pm


It's indicating 100% of the target temp, not of the maximum the machine can run.

So if the material is set to 275 deg and it's at ecactly 275 then it'll show 100%. Or if the target is 200deg. and it's at 202 deg then it'll show 101%

So all is good with your printer :D


Owen S.

Post Reply