Raft - Up studio

Share your experience with UP BOX and UP BOX+
Post Reply
calian
Posts: 4
Joined: Sat Dec 17, 2016 11:12 pm

Raft - Up studio

Post by calian » Sat Dec 17, 2016 11:19 pm

Hello,

I just bought UP box + and happy with the surface quality but final output is useless due to raft.
I have another printer "zortrax" . Compare to price they are almost same but overall quality they are really different. I read an another article tiretime is working on it but I wonder when it is going to be released. Until I have new software this is just an expensive useless machine I ever got.

kerstman
Posts: 44
Joined: Thu Nov 24, 2016 4:55 pm
Location: Bucharest

Re: Raft - Up studio

Post by kerstman » Sun Dec 18, 2016 3:25 pm

Till Tiertime releases a software update, print at 0.2mm. Removing the raft is okish once you don't print at 0.1 or 0.15mm.

calian
Posts: 4
Joined: Sat Dec 17, 2016 11:12 pm

Re: Raft - Up studio

Post by calian » Sun Dec 18, 2016 11:12 pm

Tried with 3rd party filament last night.
It's really awesome. Raft was removed effortless. I used esun ABS+ with 0.15mm.

kerstman
Posts: 44
Joined: Thu Nov 24, 2016 4:55 pm
Location: Bucharest

Re: Raft - Up studio

Post by kerstman » Tue Dec 20, 2016 11:39 am

Testing with Verbatim ABS filament for now and it seems to work a lot better on raft removal, depends on the temperature as well.
At 270C, the raft just welds on the print. At 230-240 it's more decent to remove even though there's still the issue with the software.

Post Reply