UP box 3d Models for printing.

Share your experience with UP BOX and UP BOX+
Post Reply
tomgooderham
Posts: 1
Joined: Mon Aug 22, 2016 9:52 pm

UP box 3d Models for printing.

Post by tomgooderham » Mon Aug 22, 2016 10:17 pm

Hi All,

So I spotted that some of the parts in the UP box are 3D printed - Does anyone know where I can get the files to print out these spare parts? - in particular need the pcb mount for the hotend pcb interface board! , as having spotted the biggest design flaw in the printer ever, this being the FPC connector for the ribbon cable, and then the board interface mount, which the thread has broken down for the screws...

ricks01
Posts: 166
Joined: Wed Dec 30, 2015 6:07 pm

Re: UP box 3d Models for printing.

Post by ricks01 » Tue Aug 23, 2016 4:17 am

The parts files should be in the version 2.18 of the software, in the folder that has the UP files has there is a subfolder named "examples" and the .stl files should be in there.

There are subfolders for all 3 of the different Up printers - Up mini, Up Plus and Up Box which is the one you want of course...

Post Reply