Auto leveling

Share your experience with UP BOX and UP BOX+
Post Reply
LonV
Posts: 220
Joined: Thu Nov 15, 2012 11:53 pm
Location: Phoenix, Arizona, USA

Auto leveling

Post by LonV » Fri May 01, 2015 12:30 am

Anyone know how this works on the Box? Is it just like the Plus 2 or something fancier?

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: Auto leveling

Post by wackojacko » Fri May 01, 2015 2:46 am

The Auto levelling on the UP Box is a huge improvement and way more accurate.
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

dorubalazs
Posts: 16
Joined: Thu May 18, 2017 4:26 am

Re: Auto leveling

Post by dorubalazs » Sun Dec 24, 2017 3:45 pm

Based my 1 year experience with UP Box and UP Mini2, I strongly recommend a MANUAL LEVELLING. I am doing manual levelling both UP printers and everything OK. Download UP Box+ manual and follow the steps described inside (the initial UP Box manual does not provide all steps and creates some confusion). Once you levelled manually no need to do it again for next 6-7 month.

tel
Posts: 242
Joined: Tue Feb 09, 2016 1:35 pm
Location: Australia
Contact:

Re: Auto leveling

Post by tel » Tue Dec 26, 2017 9:38 am

dorubalazs wrote:
Sun Dec 24, 2017 3:45 pm
Based my 1 year experience with UP Box and UP Mini2, I strongly recommend a MANUAL LEVELLING. I am doing manual levelling both UP printers and everything OK. Download UP Box+ manual and follow the steps described inside (the initial UP Box manual does not provide all steps and creates some confusion). Once you levelled manually no need to do it again for next 6-7 month.
Totally agree. Auto levelling has never worked well for me. I find manually levelling far better and as you say not needed to be done for quite a while after (provided you remove the perfboard before removing prints) in my experience

Post Reply