Page 1 of 1

G-Code transcoder part 2

Posted: Mon Feb 22, 2016 8:41 pm
by mr_x
Ladies and Gentlemen,

I proudly present my first completely liberated print with my UP mini:

http://stohn.de/3d/index.php/2016/02/22 ... der-part2/

Sliced with Simplify 3D: 0.2 layer height, no infill, 2 perimeter, raft
Transcoded to UP machine code and executed

Next step: Calibration und tuning... (stay tuned) :mrgreen: :mrgreen: :mrgreen:
:arrow: Part 3: https://www.up3d.com/dami/viewtopic.php?f=28&t=55250

Re: G-Code transcoder part 2

Posted: Mon Feb 22, 2016 8:56 pm
by Matchpoint
That is amazing. Please get paid for this some way or another.

Re: G-Code transcoder part 2

Posted: Tue Feb 23, 2016 9:11 pm
by pilo
Great mr_x - this would open a bunch of new possibilities for us. Please keep us posted.
Regards
Michal

Re: G-Code transcoder part 2

Posted: Thu Feb 25, 2016 12:14 pm
by coredump
Awesome work!

Re: G-Code transcoder part 2

Posted: Wed Mar 09, 2016 1:54 pm
by tridament
do you think it will be able to modify it on up plus 2 also?

Re: G-Code transcoder part 2

Posted: Wed Mar 09, 2016 8:26 pm
by mr_x
Since UP! software treats all printer same, this should also work for any other UP printer (even the latest ones).

It just might need some adjustments (steps/mm, max speed, max acceleration, ...).

Maik

Re: G-Code transcoder part 2

Posted: Thu Apr 14, 2016 10:37 am
by abear
Sorry, no worky on UPBox!
I have logged my test results in the GitHub project
https://github.com/MaikStohn/UP3D/issues/13

If there is anyway I can help, please let me know?

Re: G-Code transcoder part 2

Posted: Mon Apr 18, 2016 5:41 am
by jfmateos
Nice work mr_x
May I ask which software do you use to slice the models.

Kind regards from Spain.

Re: G-Code transcoder part 2

Posted: Tue Apr 19, 2016 12:01 pm
by mr_x
Hello,

detailed explanation and discussion is ongoing in part3 of this post:

https://www.up3d.com/dami/viewtopic.php?f=28&t=55250

Maik