WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Post improvements made for UP, and share ideas.
sugitaka
Posts: 2
Joined: Thu Feb 21, 2019 7:03 am

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Post by sugitaka » Thu Feb 21, 2019 7:51 am

hi, all
I am afinia h479 and upplus2 users.
With this setting you can print beautifully.
The attachment FixUp3d nozzle0.02 thick0.05.jpg is no longer available
nozzle0.2mm layer thick 0.05mm
UP!ver2.15
distance between the nozzle about 0.3mm thick
ABS Filament (Manufacturer unknown Cheap)
room temperature 23degrees

Orange color Filament →afinia h479
Yellow color Filament →Upplus2
Attachments
FixUp3d nozzle0.02 thick0.05.jpg
FixUp3d nozzle0.02 thick0.05.jpg (585.98 KiB) Viewed 388 times

sugitaka
Posts: 2
Joined: Thu Feb 21, 2019 7:03 am

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Post by sugitaka » Thu Feb 21, 2019 8:34 am

hi, all
I am afinia h479 and upplus2 users.
With this setting you can print beautifully.
FixUp3d nozzle0.02 thick0.05.jpg
FixUp3d nozzle0.02 thick0.05.jpg (585.98 KiB) Viewed 388 times
nozzle0.2mm layer thick 0.05mm
UP!ver2.15
distance between the nozzle about 0.3mm thick
ABS Filament (Manufacturer unknown Cheap)
room temperature 23degrees

Orange color Filament →afinia h479
Yellow color Filament →Upplus2
Attachments
FixUp3d 015.jpg
FixUp3d 015.jpg (390.29 KiB) Viewed 388 times
FixUp3d 010.jpg
FixUp3d 010.jpg (399.95 KiB) Viewed 388 times
FixUp3d 005.jpg
FixUp3d 005.jpg (387.69 KiB) Viewed 388 times

alef
Posts: 1
Joined: Fri Apr 26, 2019 7:20 am

Re: WORKING: SOFTWARE TEMP MOD - ADJUSTABLE LAYER HEIGHTS !

Post by alef » Fri Apr 26, 2019 7:24 am

There are many websites for getting information regarding working software, It will be really helpful for people.

Scheduling software

Post Reply