Page 1 of 1

[BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Wed Nov 23, 2016 9:13 am
by Blutgeist
Hello,
the CPU Upgrade Kit for the MINI arrived me today.
But i can not activate the Wifi for the Mini in the Studio software.
There is no "Network" Button in details to select the Wifi Network.

Regards
Tobias

Re: UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Thu Nov 24, 2016 7:53 pm
by realrouge
Same here.
CPU recognized but no network to select....(phone next to it connects fine over wifi...)
Mini MK 1 with up studio Windows 1.4.1.3

please support!

thanx in advance

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Mon Nov 28, 2016 1:39 am
by Tiertime-Jason
To setup wifi, you need to connect to computer using usb first or use the touch screen. After the wifi setup, you can unplug usb. :)

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Mon Nov 28, 2016 5:24 am
by Blutgeist
I followed several times the pdf instructions... but the status is still the

[Update]
Roman mailed me, that in the actual version of UP Studio for macOS, wifi is not implemented yet.

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Mon Nov 28, 2016 8:55 am
by realrouge
Tiertime-Jason wrote:To setup wifi, you need to connect to computer using usb first or use the touch screen. After the wifi setup, you can unplug usb. :)
Was always connected with usb...otherwise I could not connect to printer :)
With usb print works....only some other beep behaviour and also led light in printer is working strange. Is on when printer turned on but shuts off when printing. Double click on front button is trickering some other behaviour...not light but button is blinking red/blue (preheat? reprint?)
turned it on/off and printed in the dark again...

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Tue Nov 29, 2016 5:28 am
by Tiertime-Roman
Currently the UP Studio for Mac is not able to support the WiFi setting to UP at the first time, because of the limitation about the protocol from Apple. Our software are trying to improve this situation.

One solution is setting the wireless connection via Windows at the first step, then connect with Mac in full functions.

For more support, please also write to support@pp3dp.com.

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Posted: Tue Dec 27, 2016 5:31 pm
by realrouge
realrouge wrote:
Tiertime-Jason wrote:To setup wifi, you need to connect to computer using usb first or use the touch screen. After the wifi setup, you can unplug usb. :)
Was always connected with usb...otherwise I could not connect to printer :)
With usb print works....only some other beep behaviour and also led light in printer is working strange. Is on when printer turned on but shuts off when printing. Double click on front button is trickering some other behaviour...not light but button is blinking red/blue (preheat? reprint?)
turned it on/off and printed in the dark again...
Update: Roman from Tiertime contacted me directly after mail to support and in the end he send me a new cpu.
This one is now working with activation (don't know what it brings me) and with wifi connection working.
Pitty the app is iphone only so no advantage for me there yet.

I hope they will introduce more features in the future like lower layer setting for example.

NB. temp setting is working fine...but that was a software setting right? :)