Up software 2.18

Support for UP Software. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
pp3dp.nl
Posts: 252
Joined: Thu Jul 05, 2012 6:18 pm
Location: Holland/The Netherlands

Up software 2.18

Post by pp3dp.nl » Tue Nov 24, 2015 5:49 pm

Saw the update, version 2.18 is available. No information anywhere yet, ony difference I noticed is under Tools, there is another ''Print again'' option but with Job1 next to it. I don't know what it does because it doesn't work, the text is grey.

I thought this would be a great update because they were working on an overhaul, is that still coming or is there more to this update?

steelmans
Posts: 100
Joined: Sun Sep 20, 2015 10:18 am

Re: Up software 2.18

Post by steelmans » Tue Nov 24, 2015 6:25 pm

I really hope that was released by mistake!

I was hoping for something like this....
Image

not something like this....
Image

amd-tec
Posts: 286
Joined: Sun Apr 15, 2012 6:16 am
Contact:

Re: Up software 2.18

Post by amd-tec » Tue Nov 24, 2015 8:29 pm

Hope they did more than that one option...
"3D design with intelligent printing"
http://www.amd-tec.com

steelmans
Posts: 100
Joined: Sun Sep 20, 2015 10:18 am

Re: Up software 2.18

Post by steelmans » Wed Nov 25, 2015 8:17 am

amd-tec wrote:Hope they did more than that one option...
Looks like it was a minor update. Apparently they have added support for a new print surface they are producing. When detecting the nozzle height you will be asked to select the board type.

Tiertime-Joseph
Posts: 155
Joined: Mon Aug 27, 2012 3:45 am

Re: Up software 2.18

Post by Tiertime-Joseph » Wed Nov 25, 2015 8:51 am

Yes, it is a minor update.

We just announced UP Flex Print Board, which will be supported starting from 2.18.

Release Notes:

1. Added UP Flex Print Board support. UP Flex Print Board replaces the PCB board. Removing the printed parts off the print board will be easier than ever.

2. Added Traditional Chinese support for interface

3. Various minor bug fixes.

Joseph

steelmans
Posts: 100
Joined: Sun Sep 20, 2015 10:18 am

Re: Up software 2.18

Post by steelmans » Wed Nov 25, 2015 8:57 am

Tiertime-Joseph wrote:Yes, it is a minor update.

We just announced UP Flex Print Board, which will be supported starting from 2.18.

Release Notes:

1. Added UP Flex Print Board support. UP Flex Print Board replaces the PCB board. Removing the printed parts off the print board will be easier than ever.

2. Added Traditional Chinese support for interface

3. Various minor bug fixes.

Joseph
Hi Joseph, Where can I find information on the flex print board? Is it available yet and where can I buy it in the UK?

Tiertime-Joseph
Posts: 155
Joined: Mon Aug 27, 2012 3:45 am

Re: Up software 2.18

Post by Tiertime-Joseph » Wed Nov 25, 2015 9:20 pm

Hello,

We are gradually distributing the UP Flex Print Board through our distribution channel. It will be available very soon. There will be an update on the new offering on the website as well.

It is much better than the PCB board.

Happy Printing!

Joseph

jack_n
Posts: 12
Joined: Sat Aug 29, 2015 8:10 am

Re: Up software 2.18

Post by jack_n » Tue Dec 15, 2015 6:11 pm

Hi,

i have installed 2.18 but can not find something related to the flex board.

Is this not available for Up box?

Thanks

Joachim

Liova
Posts: 45
Joined: Wed Jun 10, 2015 8:03 am
Location: Moscow, Russia

Re: Up software 2.18

Post by Liova » Fri Dec 18, 2015 10:59 am

jack_n wrote:Hi,

i have installed 2.18 but can not find something related to the flex board.

Is this not available for Up box?
When you calibrate nozzle height now there is a dialogue asking what type of board are you using.

Stefan
Posts: 45
Joined: Tue Nov 03, 2015 5:29 am

Re: Up software 2.18

Post by Stefan » Tue Aug 23, 2016 11:04 am

Liova wrote:
jack_n wrote:Hi,

i have installed 2.18 but can not find something related to the flex board.

Is this not available for Up box?
When you calibrate nozzle height now there is a dialogue asking what type of board are you using.
I don't see that option??

tel
Posts: 242
Joined: Tue Feb 09, 2016 1:35 pm
Location: Australia
Contact:

Re: Up software 2.18

Post by tel » Tue Aug 23, 2016 11:29 am

You get it when going through the auto bed leveling or auto nozzle height process.

Stefan
Posts: 45
Joined: Tue Nov 03, 2015 5:29 am

Re: Up software 2.18

Post by Stefan » Tue Aug 23, 2016 12:56 pm

tegregg wrote:You get it when going through the auto bed leveling or auto nozzle height process.
Can you provide a screen shot?

Cheers.

Post Reply