Latest software / ROM ?

Support for UP Software. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
User avatar
scubamatt41
Posts: 303
Joined: Thu Oct 11, 2012 7:47 am
Location: The Netherlands

Latest software / ROM ?

Post by scubamatt41 » Wed Sep 03, 2014 7:50 am

Hi all,

What are the latest software and ROM versions?

cheers
Always breath out on the way UP

andries3d
Posts: 18
Joined: Wed Oct 22, 2014 2:11 am

Re: Latest software / ROM ?

Post by andries3d » Fri Oct 31, 2014 10:57 pm

I got ROM V6.100 on Up 2.12

However from the system directory of Up 2.12 - the rom version is 6.06 :?:

So, basically I can't re-flash the rom, because the one in Up 2.12 is the older version ;)
Attachments
Up mini system directory.jpg
Up mini system directory.jpg (36.19 KiB) Viewed 11552 times
UP mini - Rom V6.100 pic.jpg
UP mini - Rom V6.100 pic.jpg (35.88 KiB) Viewed 11552 times

teamcarlisle
Posts: 180
Joined: Wed Jul 25, 2012 5:00 am

Re: Latest software / ROM ?

Post by teamcarlisle » Sat Nov 01, 2014 2:38 am

Just out of curiosity, did you just recently purchase your printer? I noticed on tiertime's website the page for the Up Box says it will use up software 2.13. If you just bought your printer maybe you actually have a new firmware that will become available in version 2.13. The printer will be releasing sometime in november.

andries3d
Posts: 18
Joined: Wed Oct 22, 2014 2:11 am

Re: Latest software / ROM ?

Post by andries3d » Sat Nov 01, 2014 7:15 am

I bought second hand, the warranty already expired too :(

teamcarlisle
Posts: 180
Joined: Wed Jul 25, 2012 5:00 am

Re: Latest software / ROM ?

Post by teamcarlisle » Sat Nov 01, 2014 8:03 am

I just got home from work and checked my Up! Plus. I'm on ROM 6.07 with Software 2.12. (PC Version) I checked the download page at pp3dp.com's support section and 2.12 is the newest version, but I did notice that the last release for MAC computers was version 2.13 and from what I remember from the past in the forums is the Mac version is usually a little behind in developement and the version number wasnt the same as the pc version. Its possible the Mac version had different numbers for the ROM versions also. If you got your printer secondhand from a friend maybe ask him if he was running mac or pc.

andries3d
Posts: 18
Joined: Wed Oct 22, 2014 2:11 am

Re: Latest software / ROM ?

Post by andries3d » Sat Nov 01, 2014 9:29 am

This is got me confused,
Why we cant flash the ROM

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: Latest software / ROM ?

Post by roller » Sat Nov 01, 2014 12:26 pm

teamcarlisle wrote:I just got home from work and checked my Up! Plus. I'm on ROM 6.07 with Software 2.12. (PC Version) I checked the download page at pp3dp.com's support section and 2.12 is the newest version, but I did notice that the last release for MAC computers was version 2.13 and from what I remember from the past in the forums is the Mac version is usually a little behind in developement and the version number wasnt the same as the pc version. Its possible the Mac version had different numbers for the ROM versions also. If you got your printer secondhand from a friend maybe ask him if he was running mac or pc.
They are not really related. Certainly the Mac version trails behind in features ... I think they have brought the version numbers close together to give the illusion that its equally up to date. Probably just an extra service release of Mac software to fix some horrible glaring bug (they are common as the Mac version seems rarely to be properly tested). Anyway, I'm saying I think any consideration of version numbers between versions is just a red herring.

andries3d
Posts: 18
Joined: Wed Oct 22, 2014 2:11 am

Re: Latest software / ROM ?

Post by andries3d » Sat Nov 01, 2014 10:01 pm

Here we are, running around in circles :?:

Up until now, not a single technical support from PP3DP in this forum. I'm talking about directly from PP3DP not the local supplier.
My local supplier is very helpful , however they got problem contacting PP3DP as well

Something to be noted for.

roller
Posts: 1622
Joined: Sat Oct 06, 2012 9:09 pm
Location: Brisbane, Australia

Re: Latest software / ROM ?

Post by roller » Sun Nov 02, 2014 4:21 am

Your a little slow coming to the party if you are just noticing that now. I usually go the http://3dprintingsystems.com/support/ website for the latest software. It is often more fruitful than the PP3DP site though annoying it asks for an email first.

andries3d
Posts: 18
Joined: Wed Oct 22, 2014 2:11 am

Re: Latest software / ROM ?

Post by andries3d » Sun Nov 02, 2014 7:28 pm

I think I have been left out by my local support as well, no follow up for more than 1 week :roll:

mrich01
Posts: 6
Joined: Thu Jun 02, 2011 4:10 pm

Re: Latest software / ROM ?

Post by mrich01 » Sun Dec 28, 2014 11:10 am

Best of luck on this topic. I asked a couple of years back and got nothing.
I would still be interested in knowing what rom image is good for what versions/software levels of what printers...

Post Reply