UP Mini getting worse and worse

Support for UP mini. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Post Reply
Xonor13
Posts:12
Joined:Fri May 15, 2015 7:55 pm
UP Mini getting worse and worse

Post by Xonor13 » Sun Mar 19, 2017 12:21 am

My UP Mini has been having a lot of issues lately. UP Studio constantly has issues finding and connecting to the printer. I have no idea what is causing the issue because it happens randomly. When i connect the printer to my computer everything is fine for a few prints and then half way through a print sometimes the extruder will just stop extruding filament but continue to move around. While this happens i can't turn the print off on the computer because my computer just randomly loses its connection between my printer when this issue happens, so i'm forced to use the off switch in the back. Another issue is after a few prints my printer will just lose connection with UP Studio and then i have to turn the printer on and off about 3-4 times and then it finally realizes it is connected to my computer. Meanwhile, my computer knows it is connected all the time.

Here is a video of the issue.
https://youtu.be/8C3wOSpVXwo

Another issue that happens when i'm trying to reconnect my printer to UP Studio is that my printer will be seen as this.
Screenshot (12).png
Screenshot (12).png (73.01KiB)Viewed 4483 times
I only have one printer and i didn't name it whatever it says there. Either way the program acts like it doesn't see it anyways so i can't connect to it.

Here is a picture of what it looks like whenever the printer actually is found and connected in UP Studio.
Screenshot (13).png
Screenshot (13).png (81.27KiB)Viewed 4483 times
I have tried older software versions and they all do the same thing. Here are the log files

Code: Select all

[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[ TierTime Begin ]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]]





用户双击模型，打开程序与模型:C:\Program Files\UP Studio\win64\UPStudio.exe





before CefExecuteProcess





GetPrinterInformation from config success





BeginUpdate...





GetPrinterInformation Printername: Dan's UP Mini SN: 0





SetPlaneSize -120 0 0 120 130





GetUpdateInfo...





ConnectLastedPrinter...





Thread_BEGIN_UpdateOtherStatus





Thread_BEGIN_BackServiceThread





ConnectPrinter[USB]:75525 Error





WM_PAINT





用户双击模型，打开程序与模型:C:\Program Files\UP Studio\win64\UPStudio.exe





before CefExecuteProcess





用户双击模型，打开程序与模型:C:\Program Files\UP Studio\win64\UPStudio.exe





before CefExecuteProcess





GetUpdateInfo OK





BeginUpdate error : ServerVer <= CurrentVer SerVer:1.6.1.2 CurVer:1.6.1.2





BackServiceThread 传送成功





Send:https://www.up3d.com/winnipeg/api?apiName=uploadServiceInfo&serviceInfo={'Date':'2017-03-18 22:01:13','Language':'en','Os':'Microsoft Windows 10','CurrentVer':'1.6.1.2','PrinterSN':'999999','Count_Model_Rotate':'1'}





Receive:{"result":0,"code":"00200","message":"Succeed to upload the service info."}





Thread_BEGIN_ChromeBrowserCallback::async_read_printer_status





async_web_load_finished BEGIN





BEGIN OpenDragFiles





OpenDragFile ext ERRORC:\Program Files\UP Studio\win64\UPStudio.exe





GetVideoInfo_Json OK:[{

		"url":	"https://www.youtube.com/embed/aTH97xB-kGQ",

		"title":	"Withdraw the filament",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Video/w11.png"

	}, {

		"url":	"https://www.youtube.com/embed/x1ISld0vrEE",

		"title":	"Extrude the filament",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Video/w12.png"

	}, {

		"url":	"https://www.youtube.com/embed/uvRXdyqgQ_A",

		"title":	"Remove model from print bed",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Video/w13.png"

	}, {

		"url":	"https://www.youtube.com/embed/izDC4_wRkoQ",

		"title":	"Pause",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Video/w14.png"

	}, {

		"url":	"https://www.youtube.com/embed/14t8uR947Z0",

		"title":	"Remove the support",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Video/w15.png"

	}, {

		"url":	"https://www.youtube.com/embed/QA9UT58HVDE",

		"title":	"Pause and resume the 3D Printer",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Video/w16.png"

	}]





ChangeColor: color-default





RunJSFunc 1 Color.change('color-default');





RunJSFunc 2 Color.change('color-default');





async_web_load_finished END





AutoLogin BEGIN





BackServiceThread 传送成功





Send:https://www.up3d.com/winnipeg/api?apiName=uploadServiceInfo&serviceInfo={'Date':'2017-03-18 21:35:41','Language':'en','Os':'Microsoft Windows 10','PrinterSN':'75525','UserID':'33e4ef02-add0-11e5-9d94-d8cb8a7499d8','PrinterModel':'UP mini','Material':'PLA','RemainedMaterail':'436','NozzleTemp':'210','PlatTemp':'46','ModelFacetNum':'25116','ModelSize':'44.8558x51.1686x7','LayerThick':'0.25','FillStyle':'Loose','Quality':'FAST','MaterialUsed':'3.41','PrintTotalTime':'18m','CurrentVer':'1.6.1.2'}





Receive:{"result":0,"code":"00200","message":"Succeed to upload the service info."}





GetBannerInfo_Json OK:[{

		"url":	"https://www.up3d.com/blog/?p=307",

		"title":	"",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Banner/14787466420722.jpg"

	}, {

		"url":	"https://www.up3d.com/blog/?p=307",

		"title":	"",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Banner/14785855316444.jpg"

	}, {

		"url":	"https://www.up3d.com/?r=upboxplus",

		"title":	"",

		"path":	"tiertime://crypte/C:%5CUsers%5CDaniel%20Parker%5CAppData%5CRoaming/Tiertime/Data/Banner/14781549797404.jpg"

	}]





pixelFormat color bits : 32





pixelFormat depth bits : 24





pixelFormat stencil bits : 8







OpenGL Driver Info

==================

Vendor: NVIDIA Corporation

Version: 4.5.0 NVIDIA 378.78

GLSL Version: 4.50 NVIDIA

Renderer: GeForce GTX 1050 Ti/PCIe/SSE2



Color Bits(R,G,B,A): (8, 8, 8, 8)

Depth Bits: 24

Stencil Bits: 8



Max Texture Size: 32768x32768

Max Lights: 8

Max Clip Planes: 8

Max Modelview Matrix Stacks: 32

Max Projection Matrix Stacks: 4

Max Attribute Stacks: 16

Max Texture Stacks: 10



======================================================================







GL_ARB_vertex_buffer_object support!





OpenGL version 4  GL_ARB_framebuffer_multisample && GL_ARB_framebuffer_object support !





Video card supports WGL_EXT_swap_control.





Origin VSYNC Value: 1





SetUpMultiSample frameBufferStyle: 1





RunJSFunc 1 SYNC.Login('33e4ef02-add0-11e5-9d94-d8cb8a7499d8','ktg7y4BrnG','Xonor13');





AutoLogin OK,UserName: Xonor13





2017/03/18 22:01:55.459 async_read_printer_info





BackServiceThread 传送成功





Send:https://www.up3d.com/winnipeg/api?apiName=uploadServiceInfo&serviceInfo={'Date':'2017-03-18 21:18:23','Language':'en','Os':'Microsoft Windows 10','PrinterSN':'75525','UserID':'33e4ef02-add0-11e5-9d94-d8cb8a7499d8','PrinterModel':'UP mini','Material':'PLA','RemainedMaterail':'440','NozzleTemp':'210','PlatTemp':'46','ModelFacetNum':'36','ModelSize':'12x100x80','LayerThick':'0.35','FillStyle':'Solid','Quality':'FAST','MaterialUsed':'27.33','PrintTotalTime':'82m','CurrentVer':'1.6.1.2'}





Receive:{"result":0,"code":"00200","message":"Succeed to upload the service info."}





2017-03-18 22:01:56【PrinterStatusChange】PrinterString : Printer not Connected NEW:-1 OLD:-2





2017-03-18 22:01:56【PrinterStatusChange】MaterialChange  Name :  ConnectType:0 Material:PLA





【HeatStatus Changeto 】0





2017/03/18 22:01:56.986 async_read_printer_info





BackServiceThread 传送成功





Send:https://www.up3d.com/winnipeg/api?apiName=uploadServiceInfo&serviceInfo={'Date':'2017-03-18 20:22:30','Language':'en','Os':'Microsoft Windows 10','PrinterSN':'75525','UserID':'33e4ef02-add0-11e5-9d94-d8cb8a7499d8','PrinterModel':'UP mini','Material':'PLA','RemainedMaterail':'467','NozzleTemp':'210','PlatTemp':'46','ModelFacetNum':'396','ModelSize':'9.5x9.48126x73','LayerThick':'0.3','FillStyle':'Loose','Quality':'NORMAL','MaterialUsed':'2.21','PrintTotalTime':'14m','CurrentVer':'1.6.1.2'}





Receive:{"result":0,"code":"00200","message":"Succeed to upload the service info."}





====== CANCEL





====== CANCEL OK





Cancel Detail ====





Cancel Detail OK ====





async_setfocus_disc:0





Thread_END_BackServiceThread





[PrinterChanged] Relinked





【UpdatePrinter】 打印机重新连接，更新打印机信息与平台尺寸





GetPrinterInformation from printer success





GetPrinterInformation Printername: Dan's UP Mini SN: 75525





SetPlaneSize2-12000120130





CheckActive Begin





[PrinterChanged] USB Printer Changed





FirmwareVer<345,return





[PrinterChanged] SN changed to 75525





2017-03-18 22:01:59【PrinterStatusChange】PrinterString : Printer not Initialized NEW:0 OLD:-1





2017-03-18 22:01:59【PrinterStatusChange】PrinterChange NameChange  Name : Dan%27s%20UP%20Mini ConnectType:0 Material:PLA





2017/03/18 22:01:59.063 async_read_printer_info





CheckActive Begin





FirmwareVer<345,return





GetPrintParamFromServer ERROR Model: 10003 Receive: {"result":"1","message":"未找到对应的设备属性。"}





Initial Printer ...





wait...





[PrinterChanged] USB Printer Changed





【UpdatePrinter】 打印机重新连接，更新打印机信息与平台尺寸





GetPrinterInformation from printer success





GetPrinterInformation Printername: Dan's UP Mini SN: 75525





SetPlaneSize2-12000120130





2017-03-18 22:02:04【PrinterStatusChange】PrinterString : Printer not Initialized NEW:0 OLD:0





CheckActive Begin





2017-03-18 22:02:04【PrinterStatusChange】PrinterChange  Name : Dan%27s%20UP%20Mini ConnectType:0 Material:PLA





FirmwareVer<345,return





[USB Lock Error] IsSystemIdle





2017/03/18 22:02:04.121 async_read_printer_info





CheckActive Begin





FirmwareVer<345,return





GetPrintParamFromServer ERROR Model: 10003 Receive: {"result":"1","message":"未找到对应的设备属性。"}





wait...





wait...





wait...





wait...





wait...





wait...





wait...





wait...





wait...





wait...





[USB Lock Error] IsSystemIdle





wait...





[USB Lock Error] IsSystemIdle





wait...





[USB Lock Error] IsSystemIdle





wait...





[USB Lock Error] IsSystemIdle





wait...





[USB Lock Error] IsSystemIdle





wait...





[USB Lock Error] IsSystemIdle





wait...





[USB Lock Error] IsSystemIdle





wait...





[PrinterChanged] USB Printer Changed





【UpdatePrinter】 打印机重新连接，更新打印机信息与平台尺寸





GetPrinterInformation from printer success





GetPrinterInformation Printername: Dan's UP Mini SN: 75525





SetPlaneSize2-12000120130





CheckActive Begin





FirmwareVer<345,return





2017-03-18 22:02:42【PrinterStatusChange】PrinterChange  Name : Dan%27s%20UP%20Mini ConnectType:0 Material:PLA





2017/03/18 22:02:42.493 async_read_printer_info





CheckActive Begin





FirmwareVer<345,return





GetPrintParamFromServer ERROR Model: 10003 Receive: {"result":"1","message":"未找到对应的设备属性。"}





wait...





Initial Printer Finished





RunBreakLayer Begin





RunBreakLayer error: FirmwareVer < 351





async_setfocus_disc:1





async_setfocus_disc:0





RunBreakLayer Begin





RunBreakLayer error: FirmwareVer < 351





2017-03-18 22:02:44【PrinterStatusChange】PrinterString : Printer Ready NEW:1 OLD:0





async_setfocus_disc:1





async_setfocus_disc:0





async_setfocus_disc:0





[PrinterChanged] USB Printer Changed





【UpdatePrinter】 打印机重新连接，更新打印机信息与平台尺寸





GetPrinterInformation from printer success





GetPrinterInformation Printername: Dan's UP Mini SN: 75525





SetPlaneSize2-12000120130





CheckActive Begin





RunBreakLayer Begin





FirmwareVer<345,return





RunBreakLayer error: FirmwareVer < 351





2017-03-18 22:03:03【PrinterStatusChange】PrinterChange  Name : Dan%27s%20UP%20Mini ConnectType:0 Material:PLA





2017/03/18 22:03:03.264 async_read_printer_info





CheckActive Begin





FirmwareVer<345,return





GetPrintParamFromServer ERROR Model: 10003 Receive: {"result":"1","message":"未找到对应的设备属性。"}





[PrinterChanged] USB Printer Changed





【UpdatePrinter】 打印机重新连接，更新打印机信息与平台尺寸





GetPrinterInformation from printer success





GetPrinterInformation Printername: Dan's UP Mini SN: 75525





SetPlaneSize2-12000120130





CheckActive Begin





RunBreakLayer Begin





FirmwareVer<345,return





RunBreakLayer error: FirmwareVer < 351





2017-03-18 22:04:50【PrinterStatusChange】PrinterChange  Name : Dan%27s%20UP%20Mini ConnectType:0 Material:PLA





2017/03/18 22:04:50.985 async_read_printer_info





GetPrintParamFromServer ERROR Model: 10003 Receive: {"result":"1","message":"未找到对应的设备属性。"}





CheckActive Begin





FirmwareVer<345,return
未找到对应的设备属性 is not my printer name and i don't know why it changes or can't connect. Sometimes the printer connects fine and there are no issues and then others it just goes crazy and it doesn't work.
Top
Post Reply

Return to “UP mini”