Software Platform Calibration

Support for UP Plus and UP Plus 2. To report a bug, post with a title [BUG REPORT]. To request a feature, post with a title [FEATURE REQUEST]
Joined:Thu Nov 15, 2012 11:53 pm
Location:Phoenix, Arizona, USA
Software Platform Calibration

Post by LonV » Thu Aug 15, 2013 1:41 am

Okay, so I understand the purpose of the platform calibration (and it's cool), but how to go about doing it perplexes me. I've done it many times and usually have no issue, but here's what I did:

I manually leveled by's pretty darned close to level across the board, but I like to get any little tweaks in with the platform calibration. So I have my nozzle at about .1mm from the bed when I go into the configuration. When I say "Set nozzle height" (and confirm) it sets that value and then immediately moves the platform up .2mm (which means it's pushing on the platform). That doesn't really work, because then I end up dragging the head around on the platform.

What am I doing wrong?

Post Reply