Software - Red parts

Anything related to 3D Printing...
Post Reply
User avatar
tridament
Posts: 11
Joined: Sat Sep 05, 2015 9:38 pm

Software - Red parts

Post by tridament » Thu Oct 01, 2015 9:08 pm

Hello,

So I have multiple models and problem occurs when I open them in software then some parts are showing red ( they will not be printed correctly), even I fix them. Why does this problem occur?

Thanks in advance

User avatar
Numonic
Posts: 211
Joined: Thu Aug 16, 2012 12:11 am
Contact:

Re: Software - Red parts

Post by Numonic » Sat Nov 07, 2015 3:31 am

Hi Tridament,
Sometimes there is a modeling error, could be walls are too thin in some areas sometimes there are internal issues. What software are you using to model your object is it cad, or a package like Maya or Blender?

amd-tec
Posts: 286
Joined: Sun Apr 15, 2012 6:16 am
Contact:

Re: Software - Red parts

Post by amd-tec » Sun Feb 07, 2016 2:24 pm

Sometimes it helps when after FIX-command push the orientation button, choose ex. the FIT option and try this.

Thanks,
"3D design with intelligent printing"
http://www.amd-tec.com

mr6k
Posts: 327
Joined: Tue Feb 14, 2012 11:47 am

Re: Software - Red parts

Post by mr6k » Sun Feb 07, 2016 3:06 pm

Also sometimes after using "fix" the part shows same or other errors on a few occasions the following has worked.
Save the print model using the UP software this saves it as a up3 model. Then reopen the up3 model.

cheers

Peter

User avatar
wackojacko
Posts: 667
Joined: Fri Nov 12, 2010 5:46 am
Contact:

Re: Software - Red parts

Post by wackojacko » Thu Feb 11, 2016 9:16 am

The best thing for fixing "Red" parts in your UP software is to wash them through Netffab cloud.

https://netfabb.azurewebsites.net/
Bruce
http://www.3DPrintingSystems.com

Need help with your printer, check out our Youtube channel.
https://www.youtube.com/user/3dprinting ... /playlists

stella
Posts: 33
Joined: Tue May 03, 2016 7:42 am

Re: Software - Red parts

Post by stella » Tue May 03, 2016 8:05 am

usually after modeling, you should use modeling repair software to repair the model before slicing to print. netfabb basic is free repair software.

通常在建模之后,需要用修复软件对模型进行修复,之后再切片打印。

alexabrown
Posts: 1
Joined: Thu Apr 11, 2019 10:14 am

Re: Software - Red parts

Post by alexabrown » Thu Apr 11, 2019 10:20 am

Is this software suitable for android device? I am using Lenovo Phone. Hope we will get useful ideas from you.

Tiertime_Ocean
Posts: 35
Joined: Mon Feb 18, 2019 6:14 am

Re: Software - Red parts

Post by Tiertime_Ocean » Thu Apr 11, 2019 10:46 am

Dear Customer,

I'm sorry than we don't have android version.

Post Reply