3D Printed Bartop Arcade Machine Enclosure

Share projects and models that you like, and wow the fellow Uppers!
Post Reply
User avatar
Numonic
Posts: 211
Joined: Thu Aug 16, 2012 12:11 am
Contact:

3D Printed Bartop Arcade Machine Enclosure

Post by Numonic » Wed Mar 01, 2017 6:08 pm

Hi haven't been posting for a while have been studying other things lately mainly programming in C# :shock: but have been working on a
small Bartop Arcade machine that's printed entirely in a 3D. I'll eventually be working on making an enclosure out of wood painting it adding vinyl stickers. But needed a version strong to work out spacing of internal parts and to make sure all sizes are right.

Works great took some video footage but the screen is pretty bright.
Attachments
20170301_001743.jpg
20170301_001743.jpg (928.9 KiB) Viewed 4900 times
20170301_001735.jpg
20170301_001735.jpg (861.85 KiB) Viewed 4900 times
20170301_001726.jpg
20170301_001726.jpg (915.42 KiB) Viewed 4900 times

JuanCR
Posts: 78
Joined: Sun Jan 03, 2016 11:31 am
Contact:

Re: 3D Printed Bartop Arcade Machine Enclosure

Post by JuanCR » Wed Mar 01, 2017 6:41 pm

great job with lots of parts :-)

User avatar
Numonic
Posts: 211
Joined: Thu Aug 16, 2012 12:11 am
Contact:

Re: 3D Printed Bartop Arcade Machine Enclosure

Post by Numonic » Thu Mar 02, 2017 2:26 am

imprenta3d wrote:great job with lots of parts :-)
Thanks definitely many parts at first I was wondering if I was able to do it, but after making the Batmobile I knew I had to slice it up a bit more to get it to work. I can only imagine with the UpBox how fewer pieces would have needed to be made.

JuanCR
Posts: 78
Joined: Sun Jan 03, 2016 11:31 am
Contact:

Re: 3D Printed Bartop Arcade Machine Enclosure

Post by JuanCR » Thu Mar 02, 2017 7:28 am

I have an Up Plus and a Box, and it's a pleasure being able to print big parts forgetting how to fit them on te bed.

User avatar
Numonic
Posts: 211
Joined: Thu Aug 16, 2012 12:11 am
Contact:

Re: 3D Printed Bartop Arcade Machine Enclosure

Post by Numonic » Thu Mar 02, 2017 5:50 pm

imprenta3d wrote:I have an Up Plus and a Box, and it's a pleasure being able to print big parts forgetting how to fit them on te bed.
Ah so cool must be wonderful, does it wobble after a while from parts being so high or do the supports keep it nice and tightly fit?

JuanCR
Posts: 78
Joined: Sun Jan 03, 2016 11:31 am
Contact:

Re: 3D Printed Bartop Arcade Machine Enclosure

Post by JuanCR » Thu Mar 02, 2017 7:05 pm

Only had a problem with a shaft 100mm tall and Ø4mm, I didn't realize about vibrations until it was printed.
Apart from some special cases, it works almost perfect.

Post Reply