The Solitude of the Soul.

Share projects and models that you like, and wow the fellow Uppers!
Post Reply
jspark
Posts: 60
Joined: Thu Aug 02, 2012 8:20 am
Contact:

The Solitude of the Soul.

Post by jspark » Thu Sep 06, 2012 1:35 pm

Hi.
The model came from The Art Institute of Chicago.
It is possible to get the STL Files that scaned by 123D Catch in the art museum.

http://blog.123dapp.com/2012/09/the-art ... rtual-tour
The_Solitude_of_the_soul_The_Art_Institute_of_Chicago_up_600.jpg
The_Solitude_of_the_soul_The_Art_Institute_of_Chicago_up_600.jpg (238.9 KiB) Viewed 7342 times
The_solitude_of_the_soul_The_Art_Institute_of_Chicago_600_s.jpg
The_solitude_of_the_soul_The_Art_Institute_of_Chicago_600_s.jpg (190.56 KiB) Viewed 7342 times

APA
Posts: 18
Joined: Wed Jul 04, 2012 9:11 pm

Re: The Solitude of the Soul.

Post by APA » Thu Sep 06, 2012 10:00 pm

Nice print!

User avatar
JuliaDee
Posts: 959
Joined: Sun May 06, 2012 10:00 pm
Location: Connecticut
Contact:

Re: The Solitude of the Soul.

Post by JuliaDee » Sat Sep 08, 2012 2:14 am

What filament did you use? Any post-finishing, like painting? Really looks like stone or at least plaster!

jspark
Posts: 60
Joined: Thu Aug 02, 2012 8:20 am
Contact:

Re: The Solitude of the Soul.

Post by jspark » Sat Sep 08, 2012 7:37 am

I used normal gray ABS filament.
And there was no post-finishing at all.
There's only difference of working temperature.
I have made two of statue.
The left one is in case of low temp.(200~210deg, I don't know the exact temp.)
The right one is in case of high temp.(240~250deg)
In case of low temp., It shows more mat surface than the high temp. conditon.
So it looks like a stone or plaster as you felt. ;)
At the high working temp, the surface looks more glosy.

Post Reply