New User, Pretty Good Machine

New user in this forum can introduce yourself here. Pictures of new UP Printer, fresh prints from UP Printer, and more.
Post Reply
Joined:Mon Mar 25, 2013 11:00 am
New User, Pretty Good Machine

Post by Norluck » Mon Mar 25, 2013 1:26 pm

This is my first ever time 3D printing, and if I say I'm not excited, I'm lying. But I have ran into a small issue, and that there is excess plastic everywhere on the model when I print. Is this a known issue, or am I incorrectly calibrating my device (I have it set to 132 nozzle height, 131.8 table height. My Z setting is 0.2)

Joined:Thu Nov 08, 2012 7:32 pm

Re: New User, Pretty Good Machine

Post by ahd71 » Tue Mar 26, 2013 6:16 pm

A picture would be helpful to assist....

Joined:Tue Feb 14, 2012 11:47 am

Re: New User, Pretty Good Machine

Post by mr6k » Tue Mar 26, 2013 11:54 pm

Is the excess maybe support, does your object haveoverhangs, i.e. parts above the base that protude outwards. If so support isprinted from the base as the printer needs something to print onto when the object gets higher up.



Post Reply