Page 2 of 2

Re: New user and CURA support almost integrated

Posted: Fri Apr 12, 2019 8:19 am
by chazr33gtr
No worries dude.

I've just noticed that I hadnt done the Axes transform correctly so parts were printing correctly but mirrored as X and Y axes definitions also need swapping. This didnt show up when printing basic shapes such as cubes and cylinders or figurines for my daughter. As soon as I did some engineering parts it did!

So see attached as the latest script which corrects this. So as far as I can see now this is fully working.

Re: New user and CURA support almost integrated

Posted: Fri Apr 12, 2019 9:08 am
by bjorn
Been there, done that :D

Re: New user and CURA support almost integrated

Posted: Tue Apr 16, 2019 12:36 pm
by RODHAL
I'm wearing down overriding the control board all together, yet there have been more than one requesting for Cura all things considered so figure ideally you will put it on github or something for others to use and pick up from.

Re: New user and CURA support almost integrated

Posted: Fri Aug 02, 2019 10:08 am
by that_Barry0714
Hello! I'm from Taiwan. It's a new 3D printer user.
I read your procedures and did it as you said.
But there's some problem, that
Cura 3.6 can't detect my up box+, I don't know what happened.
can you teach me how to fix this?
thank you~~~!!
1.
Image
2.
Image
3.
Image
4.
Image