New user and CURA support almost integrated

New user in this forum can introduce yourself here. Pictures of new UP Printer, fresh prints from UP Printer, and more.
chazr33gtr
Posts: 11
Joined: Mon Mar 25, 2019 10:47 pm

Re: New user and CURA support almost integrated

Post by chazr33gtr » Fri Apr 12, 2019 8:19 am

No worries dude.

I've just noticed that I hadnt done the Axes transform correctly so parts were printing correctly but mirrored as X and Y axes definitions also need swapping. This didnt show up when printing basic shapes such as cubes and cylinders or figurines for my daughter. As soon as I did some engineering parts it did!

So see attached as the latest script which corrects this. So as far as I can see now this is fully working.
Attachments
_UPPostProcess_v2.zip
(1.37 KiB) Downloaded 36 times

bjorn
Posts: 172
Joined: Fri Aug 10, 2018 6:00 pm

Re: New user and CURA support almost integrated

Post by bjorn » Fri Apr 12, 2019 9:08 am

Been there, done that :D

RODHAL
Posts: 1
Joined: Tue Apr 16, 2019 12:22 pm

Re: New user and CURA support almost integrated

Post by RODHAL » Tue Apr 16, 2019 12:36 pm

I'm wearing down overriding the control board all together, yet there have been more than one requesting for Cura all things considered so figure ideally you will put it on github or something for others to use and pick up from.

Post Reply