you are the best! Keep up the good work

I have tested the new software and this is My opinion about it: I like to print with colorfabb PLA on the Up Mini - -1. with the new software the Raft sticks extremely strong to the modells (didn´t was so with the old software) -2. I am missing the option to pause the printer at a specific height. +...

looks like the printhead had to jump very fast from 1 side to the 2nd side and got a little bit to hot

you can avoid this by printing 1 part after another

Try out the newer version 2.18 it works better for me ( didnt get this problem that much anymore, but still sometimes ) here is how I fix this Problem on the UP Plus: if you get it 1. Turn OFF the printer - 2. Close The UP Software 3. unplug Energy Cabel 4. press the turn on button for 3sek ( so all...

Das kommt auf das Material an das man verwendet! - Der UP! Mini hat keinen eingebauten Filter von daher bringt es nicht wirklich viel - es ist ein geschlossenes System da 3D Drucker die ABS drucken nunmal besser funktionieren wenn das System keine Kalte Luft von außen abbekommt ;) Im Grunde kann man...

well you can turn off Rafts but you cant turn off Support maybe its Support in your case? try a diffrent stl-modell you can placing the Models by holding "ctrl" button but you are right if you try to set the Z axis higher or lower it doenst change anything - even on windows pc if this didnt help you...

i had the same problem with software 2.17 on the up plus

try using 2.18 or an older version of the up software

Try using version 2.18

2.17 was really bad for my up plus and up mini....

Wow! Nice one
more of that please

if you press "print" you can set some settings

one setting named " no raft" just klick it.

maybe you need to re calibrate your printer if you want to print raftless just try it out

1.) Just download the Latest Software - start the Software - go to Tools - then on Install Rom and search in the Folder of the Software the Rom file :) 2.) Close your System heat the Bed up for 15min and then do your print - also use Glue! it helps a lot! 3.) The Wall of your Object has to be 0.6mm ...

Yeah I got the same Problem on the UP Plus 2
I got it after I tryed out the New Version 2.17 Software....

Try to use an older Version in my case 2.13 works fine!

Greetings