Search found 46 matches

by realrouge
Tue Dec 27, 2016 5:37 pm
Forum: UP mini 2
Topic: 3rd Party Filament?
Replies: 13
Views: 12073

Re: 3rd Party Filament?

Hi All....did u noticed the new temperature option in the new UP studio software?
It works fine so far for me....lower temperature for 3rd party abs becasue the UP filament is working at higher temperature...

look for it after 16 minutes here: https://www.youtube.com/watch?v=Ksem3NVTWiA

cheers
by realrouge
Tue Dec 27, 2016 5:31 pm
Forum: UP Software
Topic: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade
Replies: 6
Views: 4819

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

To setup wifi, you need to connect to computer using usb first or use the touch screen. After the wifi setup, you can unplug usb. :) Was always connected with usb...otherwise I could not connect to printer :) With usb print works....only some other beep behaviour and also led light in printer is wo...
by realrouge
Tue Dec 27, 2016 5:30 pm
Forum: Official Announcement
Topic: CPU upgrade for older models
Replies: 40
Views: 33649

Re: CPU upgrade for older models

Got mine last week (also order new nozzle heater V5) for Up! Mini mk1 All installed fine but wifi is not working....no network is showing up... Within software I also don't see any changes.....so far I just have a bought spare cpu :) Did you follow the instructions about registering the wifi with i...
by realrouge
Mon Nov 28, 2016 8:55 am
Forum: UP Software
Topic: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade
Replies: 6
Views: 4819

Re: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

To setup wifi, you need to connect to computer using usb first or use the touch screen. After the wifi setup, you can unplug usb. :) Was always connected with usb...otherwise I could not connect to printer :) With usb print works....only some other beep behaviour and also led light in printer is wo...
by realrouge
Mon Nov 28, 2016 8:44 am
Forum: Official Announcement
Topic: CPU upgrade for older models
Replies: 40
Views: 33649

Re: CPU upgrade for older models

Got mine last week (also order new nozzle heater V5) for Up! Mini mk1 All installed fine but wifi is not working....no network is showing up... Within software I also don't see any changes.....so far I just have a bought spare cpu :) Did you follow the instructions about registering the wifi with i...
by realrouge
Thu Nov 24, 2016 8:31 pm
Forum: Official Announcement
Topic: CPU upgrade for older models
Replies: 40
Views: 33649

Re: CPU upgrade for older models

Got mine last week (also order new nozzle heater V5) for Up! Mini mk1
All installed fine but wifi is not working....no network is showing up...
Within software I also don't see any changes.....so far I just have a bought spare cpu :)
by realrouge
Thu Nov 24, 2016 7:53 pm
Forum: UP Software
Topic: [BUG REPORT] UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade
Replies: 6
Views: 4819

Re: UP Studio macOS 1.3.0.1 and new Mini CPU Upgrade

Same here.
CPU recognized but no network to select....(phone next to it connects fine over wifi...)
Mini MK 1 with up studio Windows 1.4.1.3

please support!

thanx in advance
by realrouge
Thu Oct 20, 2016 9:19 pm
Forum: Netherlands
Topic: met welke software maak je nu een 3d model
Replies: 3
Views: 5667

Re: met welke software maak je nu een 3d model

Beetje laat maar ik gebruik http://www.3dsystems.com/shop/invent. Is niet zo duur maar wel erg makkelijk in gebruik. Maak verder vaak gebruik van gratis Tinkercad (tinkercad.com) Je moet je wel ff registreren maar kost niks en is online. Mooiste vind ik dat je stl files kan importeren. Als je al goe...
by realrouge
Thu Oct 20, 2016 1:01 pm
Forum: UP mini
Topic: Fill issues
Replies: 6
Views: 6146

Re: Fill issues

Hi Tegregg, You can also "fix" it by uploading the stl into tinkercad.com (free register only online design software) Have fixed some third party designs with it. The import function automaticly smooths things... Then export the design for 3d printing which makes it another stl file again... Within ...
by realrouge
Fri Jan 22, 2016 10:15 am
Forum: Netherlands
Topic: hallo klein probleempje
Replies: 2
Views: 4041

Re: hallo klein probleempje

Hallo bart, Lijkt inderdaad een calibratie probleem te zijn. Kijk in de handleiding en bijvoorbeeld hier: https://www.youtube.com/watch?v=DYjA5ThfXUg suuk6 ps. in het begin maakte ik steeds de gaatjes schoon maar dat is niet nodig. Het moet wel glad zijn bij elke print. Het nieuwe plastic versmelt m...
by realrouge
Fri Jan 08, 2016 2:07 pm
Forum: UP mini
Topic: Printing with pla
Replies: 7
Views: 6595

Re: Printing with pla

Printinp PLA will work out of the box (using PLA settings) but when printing large or many objects the steppermotor is getting 2 hot for pla and it starts slipping. Have 2 install a cooler mod yet because I print mostly with ABS (search thingiverse.com for different models) Have read that using a st...
by realrouge
Fri Jan 08, 2016 2:03 pm
Forum: Netherlands
Topic: Geen motor bewegingen en extruder blijft koud.
Replies: 3
Views: 5351

Re: Geen motor bewegingen en extruder blijft koud.

Beetje laat maar is een en ander al opgelost? Of heb je nog interesse in wat foto's van binnenwerk UP! Mini?
by realrouge
Wed Dec 31, 2014 5:56 pm
Forum: Netherlands
Topic: print slierten
Replies: 2
Views: 5004

Re: print slierten

de nozzel (printkop) moet ongeveer 2 blaadjes standaard a4 papier van het printoppervlakte staan bij aanvang print. dat kan door genoemde calibratie methode. zie dus de handleiding :)
by realrouge
Wed Dec 31, 2014 5:54 pm
Forum: Netherlands
Topic: Rubber printen met de Up! plus 2
Replies: 1
Views: 4329

Re: Rubber printen met de Up! plus 2

Hoi Rene. Ik neem aan dat je flexpla bedoelt (of andere flexibele PLA filament). Ik heb oa flexpla van Formfutura gebruikt en dat werkt goed op mijn up! mini Heb wel de printsettings op ABS ipv PLA gezet want anders bleef filament plakken in de extruder (niet heet genoeg?) Ook zet ik de raft uit en ...
by realrouge
Wed Dec 31, 2014 5:47 pm
Forum: Netherlands
Topic: Autocad en de UP
Replies: 1
Views: 3884

Re: Autocad en de UP

Ga naar https://www.tinkercad.com/ maak een gratis account aan en import de stl
Scale (indien nodig) daar naar juiste afmeting en exporteer dan weer (voor 3d printing)
Mijn ervaring is dat die stl dan wel juiste afmeting blijft houden als je hem in de up software inlaad.

suuk6
by realrouge
Wed Dec 31, 2014 11:26 am
Forum: UP Plus
Topic: pleeaasseee.... need help.. trouble with printing [image]
Replies: 9
Views: 8408

Re: pleeaasseee.... need help.. trouble with printing [image

mmm doesn't look good. Only thing I can think of is maybe the printhead is not installed quite right. I'm talking about the whole thing that should be clicked into the magnet placeholders Maybe take it out and click back in and ensure that it is placed correct as possible... Have you tried another s...
by realrouge
Thu Nov 13, 2014 10:23 am
Forum: New Uppers
Topic: new from the netherlands
Replies: 11
Views: 8500

Re: new from the netherlands

Welkom!

Check also the Dutch section of the forum: http://www.pp3dp.com/forum/viewforum.php?f=31

Happy printing!
by realrouge
Thu Nov 13, 2014 10:18 am
Forum: Netherlands
Topic: Nieuw uit Belgie
Replies: 3
Views: 5695

Re: Nieuw uit Belgie

Beetje laat maar toch welkom! :) Ik heb de up mini sinds maart 2013 en nog steeds erg tevreden. Voor wat betreft je vragen: ad 1: de mini print 0,2mm layers en de plus 0,15mm. Je zal direct uit printer de laagjes altijd zien en het hangt soms ook wat af van kwaliteit ontwerp (de 3d file). Er zijn op...
by realrouge
Mon Aug 18, 2014 2:58 pm
Forum: General Discussion
Topic: PolyFlex and UP Mini
Replies: 2
Views: 3651

Re: PolyFlex and UP Mini

I use FlexPLA from Formfutura and I print it with default ABS settings (no temp mod)
PLA setting is not working for me with flexpla

And because support and rafts are very hard to remove I use blue tape (eurocel also from Formfutura) which I stick to the celboard.

Works fine for me...

cheers
by realrouge
Mon Jan 20, 2014 9:55 pm
Forum: Projects and Models
Topic: 1:200 tanks - an ongoing project
Replies: 9
Views: 11088

Re: 1:200 tanks - an ongoing project

WOT player here 2.....would be great if you post them on thingiverse! keep us posted!