Search found 11 matches

by masrodjie
Sun Aug 25, 2019 1:47 am
Forum: UP mini 2
Topic: Sleep option
Replies: 6
Views: 6674

Re: Sleep option

The sleep function does put the machine into the de-initialised mode. The main purpose is to make sure all the fans have been powered down. Sleep is standby. Different with power off. Mainboard is still on, wifi is still connected. Fan is still on since it's dangerous when extruder is hot and fan s...
by masrodjie
Sun Jul 28, 2019 11:29 pm
Forum: UP mini 2
Topic: X Idler broke.
Replies: 22
Views: 5806

Re: X Idler broke.

I have experienced it before. The local reseller was replaced the broken part since it's under warranty (1 year) and it's free. And thanks i was printed your model replacement part to use it my spare when it happen again.
by masrodjie
Sat Jun 08, 2019 2:57 am
Forum: UP mini 2
Topic: Up Mini 2 board mod
Replies: 4
Views: 1455

Re: Up Mini 2 board mod

no it is not .. that is board that goes to up plus 2 and similar printers, mini2 have different board on extruder ... that one might have same pinout for the imput but the position of the connectors is different on the one on mini2 Ok thank you. I thought it has same position of the connector with ...
by masrodjie
Mon Jun 03, 2019 2:21 pm
Forum: UP mini 2
Topic: Speaker location in Up Mini 2
Replies: 1
Views: 971

Re: Speaker location in Up Mini 2

On the rear side. Put the foam support come from original package so the bed hold it to top. Open the four screw to open the board cover. It's made from metail. I am using hot glue gun and put it to the buzzer to muffle it.
by masrodjie
Sat May 25, 2019 3:46 am
Forum: Look! My Mod
Topic: Up! Mini 2 + Duet electronics! (Linear rails and real hotbed!)
Replies: 55
Views: 12129

Re: Up! Mini 2 + Duet electronics! (Linear rails and real hotbed!)

Realized the motor pin out and pin spacing were the same so they plug straight in, end stops needed an adapter but quick work. Need to print som parts to hold test indicator to verify steps/mm and stuff, but so far so good. X/Blue (moves bed in/out): 110step/mm, Backwards, Active high/NC limit swit...
by masrodjie
Sat May 25, 2019 2:28 am
Forum: Look! My Mod
Topic: Up! Mini 2 + Duet electronics! (Linear rails and real hotbed!)
Replies: 55
Views: 12129

Re: Up! Mini 2 + Duet electronics! (Linear rails and real hotbed!)

Decided to double check the pin out for the print head PCB i've seen here before. Seems the Mini 2 has a slightly different layout. But as mentioned in the heated bed thread, I don't think the wiring can handle the move to 24V, so I need to use the original power supply once I get the heat running....
by masrodjie
Thu May 23, 2019 5:21 pm
Forum: UP mini 2
Topic: Up Mini 2 board mod
Replies: 4
Views: 1455

Up Mini 2 board mod

I've plan to mod the board for my up mini 2. I just found on the aliexpress, there are adapter board for extruder. It's for UP! PP3DP TIERTIME 3D AFINIA. Is it also compatible with UP Mini 2? https://www.aliexpress.com/item/32834163766.html https://ae01.alicdn.com/kf/HTB13yR1bzihSKJjy0Ffq6zGzFXa1.jp...
by masrodjie
Sat Apr 27, 2019 1:02 pm
Forum: Look! My Mod
Topic: mini 2 heater mod
Replies: 19
Views: 2809

Re: mini 2 heater mod

Wow it's really nice. Can you post the wiring diagram?
by masrodjie
Sat Jul 22, 2017 7:18 am
Forum: UP mini 2
Topic: 3rd Party Filament?
Replies: 13
Views: 11531

Re: 3rd Party Filament?

I am using eSun PLA+ and ABS+ and has no problem so far
by masrodjie
Wed Jul 19, 2017 3:29 pm
Forum: UP mini 2
Topic: Up app
Replies: 1
Views: 2536

Re: Up app

Right now it's only available on iPhone
by masrodjie
Wed Jul 19, 2017 3:27 pm
Forum: UP mini 2
Topic: Doubt Up mini 2 - Software Upstudio
Replies: 2
Views: 3131

Re: Doubt Up mini 2 - Software Upstudio

1. There are no control the speed on Up Studio. But there are option on quality in printer setting. This is similar with speed. 2. On the circle menu right top, click more - save model. This will be save the model. The format is only for up studio so you can't open it on any software. 3. There are n...