Search found 45 matches

by Stefan
Wed Apr 04, 2018 12:21 am
Forum: UP mini
Topic: Part material not enough, annoying as hell!
Replies: 3
Views: 2616

Re: Part material not enough, annoying as hell!

OK so I solved it for now.

I tried re-seating the CPU and formatting the SD card but still didn't work.

I added a massive number in the ABS material (something like 234234234234234) and its now working!
by Stefan
Mon Apr 02, 2018 11:49 pm
Forum: UP mini
Topic: Part material not enough, annoying as hell!
Replies: 3
Views: 2616

Re: Part material not enough, annoying as hell!

ricks01 wrote:
Mon Apr 02, 2018 3:51 pm
I've never heard of this happening before, is it possibly be related to the "hacked" software you are using?
Nah not at all.

It does it with the stock software and it does it with Up Studio as well.
by Stefan
Mon Apr 02, 2018 4:23 am
Forum: UP mini
Topic: Part material not enough, annoying as hell!
Replies: 3
Views: 2616

Part material not enough, annoying as hell!

Using either the original Up 2.18 software or Up Studio my material keeps resetting to either 0g, -21g or -2g. I prefer using the 2.18 software as it gives me more flexibility with the hack version to change options and layer 1, 2 etc temps. Has anyone got this issue before? I can't print anything b...
by Stefan
Sun Apr 09, 2017 4:18 am
Forum: UP Software
Topic: New spool weight keeps going to 0
Replies: 3
Views: 2366

New spool weight keeps going to 0

Whenever I start a new print the filament weight in the maintenance box keeps reverting back to 0 when I start printing and it says there is not enough material. If I click yes to add print material nothing happens. If I click no not to add print material the light flashes like its sending the print...
by Stefan
Sun Feb 26, 2017 11:51 am
Forum: UP mini
Topic: Beeping volume
Replies: 1
Views: 2927

Beeping volume

I don't want to silence the beep but is there a way to make it a bit quieter?
by Stefan
Sun Feb 26, 2017 11:50 am
Forum: UP mini
Topic: Not turning on and continual beeping
Replies: 7
Views: 5629

Re: Not turning on and continual beeping

I have seen that the CPU costs almost as much as a new Up Mini.

Better off putting in another few hundred bucks and get the 2.
by Stefan
Sun Feb 26, 2017 11:45 am
Forum: UP Software
Topic: UP software V1.16 and Mac V1.3
Replies: 26
Views: 38428

Re: UP software V1.16 and Mac V1.3

I'm still waiting for basic temperature controls. We've been asking for it for over a year. Yep, that is the number one feature I would like to. This is why I am using the original software with the hacked .dll so you can change the layer 1, layer 2 and layer 3+ temps which is what I really need. U...
by Stefan
Sun Feb 26, 2017 11:34 am
Forum: UP mini
Topic: bed preheating issue
Replies: 1
Views: 2726

Re: bed preheating issue

I highly recommend purchasing the upgraded heated bed. It is the best upgrade I have ever got for the Up Mini and it makes printing in ABS easy as pie!

This is the one, looks like it's a tricky one to find these days.

https://3delta.com.au/up-mini-bed-v2
by Stefan
Sun Feb 26, 2017 8:37 am
Forum: UP Software
Topic: 0% Support material??
Replies: 3
Views: 3232

Re: 0% Support material??

ricks01 wrote:It is already there,

Printer/Preferences/Setup

In the Support section under Area select "ONLY BASE"
That only looks to be in Studio not the original software.
by Stefan
Fri Feb 24, 2017 11:18 am
Forum: UP Software
Topic: 0% Support material??
Replies: 3
Views: 3232

0% Support material??

I am using the older software with my Up Mini (very reluctant to go to Studio) and I want there to be an option to print without support.

Can this feature please be implemented?!
by Stefan
Fri Feb 24, 2017 11:15 am
Forum: UP Software
Topic: UP Studio vs Simplify3D
Replies: 22
Views: 23422

Re: UP Studio vs Simplify3D

I love my Up MIni but one thing I hate about it is the fact that it isn't open sourced!

Please, please let us use your products with third part apps such as Simplify3D!
by Stefan
Sat Feb 04, 2017 10:19 pm
Forum: UP mini
Topic: filament stuck to base
Replies: 5
Views: 6021

Re: filament stuck to base

ricks01 wrote:
wackojacko wrote:Yes what Rick said, use the scraper and be quite rough with it.
Use caution when using the scraper so that you don't accidentally cut your hand, something I have done more than once. LOL
Me too.

I caught just below my thumb and have a permanent scar now.
by Stefan
Fri Feb 03, 2017 10:01 pm
Forum: UP mini
Topic: Perf board alternatives?
Replies: 3
Views: 4090

Re: Perf board alternatives?

Hello everyone! When printing I have success using the perf boards that came with the printer. I tried using UP's flex sheet to print raftless and it was rubbish. I want to know why the perf boards are so expensive ($30 for one here in Australia). Can I buy them cheaper or is there an alternative I...
by Stefan
Fri Feb 03, 2017 11:05 am
Forum: UP mini
Topic: Perf board alternatives?
Replies: 3
Views: 4090

Perf board alternatives?

Hello everyone! When printing I have success using the perf boards that came with the printer. I tried using UP's flex sheet to print raftless and it was rubbish. I want to know why the perf boards are so expensive ($30 for one here in Australia). Can I buy them cheaper or is there an alternative I ...
by Stefan
Tue Aug 23, 2016 12:56 pm
Forum: UP Software
Topic: Up software 2.18
Replies: 11
Views: 11656

Re: Up software 2.18

tegregg wrote:You get it when going through the auto bed leveling or auto nozzle height process.
Can you provide a screen shot?

Cheers.
by Stefan
Tue Aug 23, 2016 11:04 am
Forum: UP Software
Topic: Up software 2.18
Replies: 11
Views: 11656

Re: Up software 2.18

Liova wrote:
jack_n wrote:Hi,

i have installed 2.18 but can not find something related to the flex board.

Is this not available for Up box?
When you calibrate nozzle height now there is a dialogue asking what type of board are you using.
I don't see that option??
by Stefan
Tue Aug 23, 2016 10:14 am
Forum: UP Software
Topic: Platform Calibration error, help!
Replies: 4
Views: 4955

Re: Platform Calibration error, help!

After talking to helpdesk support I ended up re-formatting the SD card and all is working again! :D
by Stefan
Sun Aug 21, 2016 10:31 am
Forum: UP Software
Topic: Platform Calibration error, help!
Replies: 4
Views: 4955

Re: Platform Calibration error, help!

Tiertime-Jason wrote:can you send print jobs to printer normally?
:?:
I haven't tried. It's uneven and I will be printing a few big jobs in ABS and the last thing I want is for the print not to stick properly.
by Stefan
Sun Aug 21, 2016 9:23 am
Forum: UP Software
Topic: Platform Calibration error, help!
Replies: 4
Views: 4955

Re: Platform Calibration error, help!

If I have at least one adjustment out of the nine I get the error.

It's such a crap error message, it means nothing. I haven't been able to print at all today!
by Stefan
Sun Aug 21, 2016 12:12 am
Forum: UP Software
Topic: Platform Calibration error, help!
Replies: 4
Views: 4955

Platform Calibration error, help!

Hello all. I chucked in my new extruder block and now conducting a platform calibration. Once I set all my values and click save a "Error, data verify error" pops up and doesn't save my platform calibration settings. I have been out of action for more than a week due to the replacement part now I ca...