Search found 62 matches
- Sun Apr 08, 2018 3:53 am
- Forum: General Discussion
- Topic: Can the Up Box+ print using PETG?
- Replies: 5
- Views: 4648
Re: Can the Up Box+ print using PETG?
I've printed with PETG. Works fine. Can't say much about the HEPA filter, but I don't assume it's filtering anything anyway. Might want to get a stainless nozzle though (Microswiss) because they seem to work better for higher temp prints. So, I just change to a stainless noozle, put in the PETG fil...
- Fri Feb 23, 2018 12:55 am
- Forum: General Discussion
- Topic: Can the Up Box+ print using PETG?
- Replies: 5
- Views: 4648
Can the Up Box+ print using PETG?
Hello, can the Up Box+ print using PETG? If so, is it as simple as just putting in the filament and everything will be done automatically? Is the built-in filtration system effective in filtering the toxic nano particles if I print using PETG rather than ABS or PLA?
- Fri Feb 23, 2018 12:54 am
- Forum: General Discussion
- Topic: If I buy the Up Box+ or Afinia H800+ in North America, who will provide the support?
- Replies: 3
- Views: 3704
Re: If I buy the Up Box+ or Afinia H800+ in North America, who will provide the support?
I am in Canada. I can buy either machine depending on which local online reseller I choose.
- Mon Feb 19, 2018 3:38 pm
- Forum: General Discussion
- Topic: If I buy the Up Box+ or Afinia H800+ in North America, who will provide the support?
- Replies: 3
- Views: 3704
If I buy the Up Box+ or Afinia H800+ in North America, who will provide the support?
Hello, I have a question from Tiertime. if I buy the Up Box+ or Afinia H800+ online in North America, what will happen when something goes wrong? Will Tiertime and/or the company where I buy the printer provide the support?
- Fri Feb 16, 2018 8:53 pm
- Forum: General Discussion
- Topic: How noisy is the Up Box Plus?
- Replies: 5
- Views: 4634
Re: How noisy is the Up Box Plus?
Thanks Owen.
- Fri Feb 16, 2018 8:53 pm
- Forum: General Discussion
- Topic: What happens when filament is running out during printing?
- Replies: 2
- Views: 3320
- Fri Feb 16, 2018 8:30 pm
- Forum: General Discussion
- Topic: Up Box Plus vs Up Plus 2
- Replies: 1
- Views: 2782
Up Box Plus vs Up Plus 2
Hello, I had an Up Plus 2. I was happy with it. Besides print volume and filtration system, how are these two printers compared? Does the Up Box Plus produce better quality prints than the Up Plus 2?
- Fri Feb 16, 2018 8:28 pm
- Forum: General Discussion
- Topic: What is the different between Afinia H800+ sold in North America and Up Box+?
- Replies: 4
- Views: 4183
Re: What is the different between Afinia H800+ sold in North America and Up Box+?
It looks like I can buy either one depending on which company I purchase from. Given a choice, which would be better?
- Fri Feb 16, 2018 6:50 pm
- Forum: General Discussion
- Topic: What happens when filament is running out during printing?
- Replies: 2
- Views: 3320
What happens when filament is running out during printing?
Given that the spool is 0.5kg, what happen if the filament runs out during printing? Does the printer allow the users to change filament and then hit some kind of continue button to resume the printing task? Do we have to start printing all over again?
- Fri Feb 16, 2018 6:47 pm
- Forum: General Discussion
- Topic: Do I also need to close the door when printing PLA on Up Box+?
- Replies: 1
- Views: 2866
Do I also need to close the door when printing PLA on Up Box+?
Hello, on some printers, it is recommended to keep the top cover open if one wants to have good quality prints when printing PLA. On the other hand, one should keep the print volume warm when printing ABS. It looks like the UpBox+ needs to have the door closed all the time. How does this work?
- Fri Feb 16, 2018 6:42 pm
- Forum: General Discussion
- Topic: How noisy is the Up Box Plus?
- Replies: 5
- Views: 4634
How noisy is the Up Box Plus?
Hello, if I buy the printer, I may use it in the evenings. How noisy is this printer when printing in a very quiet night? Is it silent? Will people next door or above me hear it? My nosy neighbors may complain if they hear the sound.
- Wed Feb 07, 2018 5:10 pm
- Forum: General Discussion
- Topic: How often shall we replace the air filter of the Up Box+?
- Replies: 13
- Views: 9462
Re: How often shall we replace the air filter of the Up Box+?
Thanks. What if I print only using PLA?
- Mon Feb 05, 2018 5:27 am
- Forum: General Discussion
- Topic: How often shall we replace the air filter of the Up Box+?
- Replies: 13
- Views: 9462
Re: How often shall we replace the air filter of the Up Box+?
Thanks Joseph. That is scary. What filament did they use?Tiertime-Joseph wrote: ↑Fri Feb 02, 2018 3:21 pmHi,
Just want to share the picture provided by Octave, our partner in US.
Cheers
Joseph
- Mon Feb 05, 2018 5:26 am
- Forum: General Discussion
- Topic: How often shall we replace the air filter of the Up Box+?
- Replies: 13
- Views: 9462
Re: How often shall we replace the air filter of the Up Box+?
Thanks Owen. So far, my choices are: Up Box+, Raise3D N2+, Ultimaker 3 and TAZ 6. I consider Up Box+ because I had good experience using Up Plus 2 and large size and its filtration system. Does it inherit all the good things (such as nice working auto leveling, nice printing, good software) of the U...
- Sun Feb 04, 2018 5:05 pm
- Forum: General Discussion
- Topic: What is the different between Afinia H800+ sold in North America and Up Box+?
- Replies: 4
- Views: 4183
Re: What is the different between Afinia H800+ sold in North America and Up Box+?
Thanks Joseph, do you mean the software used by the H800+ sold in North America have limited features compared with the Up Box+?
- Sun Feb 04, 2018 5:03 pm
- Forum: General Discussion
- Topic: Compositions of UP Filaments
- Replies: 0
- Views: 2920
Compositions of UP Filaments
Hello, is there a list of materials used to make the UP Filaments (both PLA and ABS)? I want to check for health-related matters.
- Sun Feb 04, 2018 4:57 pm
- Forum: General Discussion
- Topic: Are there other PLA filaments made in the USA that work well with the Up Box Plus?
- Replies: 1
- Views: 3004
Are there other PLA filaments made in the USA that work well with the Up Box Plus?
Hello, are there PLA filaments made in the USA that work well on the Up Box Plus? Do I need to make a holder to hole the filaments so that they could be fed into the extruder smoothly?
- Fri Feb 02, 2018 1:41 pm
- Forum: General Discussion
- Topic: How often shall we replace the air filter of the Up Box+?
- Replies: 13
- Views: 9462
Re: How often shall we replace the air filter of the Up Box+?
Thanks. I have to choose between Up Box + with a filter that "might" work or a larger build volume printer. The problem is nobody knows how effective the filter is.
- Fri Feb 02, 2018 1:39 pm
- Forum: General Discussion
- Topic: Please clarify the dimensions of Up Box+
- Replies: 2
- Views: 3286
- Thu Feb 01, 2018 11:43 pm
- Forum: General Discussion
- Topic: How often shall we replace the air filter of the Up Box+?
- Replies: 13
- Views: 9462
Re: How often shall we replace the air filter of the Up Box+?
Thanks Owen. Is there an indicator to tell the users when to change? Do you find such filter helpful?